Does Trichlor Raise CYA? Yes, About 0.6 ppm for Each ppm of Chlorine

Does Trichlor Raise CYA? Yes, About 0.6 ppm for Each ppm of Chlorine

Yes. Trichlor adds about 0.6 ppm of CYA for each ppm of chlorine it puts in the water. That CYA stays until fresh water dilutes it.

CYA is cyanuric acid, also called stabilizer. It shields chlorine from sunlight. For you as a dealer, it means one thing: manage CYA by the test reading, and when it nears or passes the local limit, move the customer to a chlorine with no stabilizer.

We supply trichlor, dichlor and cal hypo to distributors and brands. Here is what we tell the dealers we supply.

  • Trichlor adds about 0.6 ppm of CYA per ppm of chlorine. Dichlor adds about 0.9. Cal hypo adds none.
  • CYA only drops when fresh water goes into the pool.
  • The US model pool code sets a ceiling for CYA, and local rules can differ.
  • High-CYA customers stop adding stabilizer and replace part of the water if needed. Then they move to a chlorine with no stabilizer, such as cal hypo. Indoor and public-spa customers use one too. Stock both kinds.

Yes, trichlor adds CYA: here is how much

Separate closed trichlor and dichlor pails and a tall white cal hypo drum above schematic pools comparing their CYA contribution.

For the same chlorine dose, trichlor and dichlor leave stabilizer in the water, and cal hypo leaves none.

Trichlor tablets carry their own stabilizer. Every time a customer adds chlorine with them, CYA goes in too. Dichlor does the same, and adds even more. Cal hypo adds none.

So tablet and dichlor customers reach a high reading long before cal hypo customers.

Trichlor: about 0.6 ppm of CYA per ppm of chlorine

Start with the label strength, called available chlorine. It is the share of the product that works as chlorine. ppm means parts per million, the unit on a pool test strip.

Pure trichlor is about 92% available chlorine 13. It is also about 56% cyanuric acid by weight 13. Divide one by the other: 56 ÷ 92 ≈ 0.6. So each ppm of chlorine from trichlor brings about 0.6 ppm of CYA. Both figures come from a 2018 review table on PubMed Central (PMC).

So a commercial pool that feeds a lot of chlorine every day sees CYA climb very quickly.

Tablets on the shelf are labeled at 90% available chlorine 8. Tablets with added ingredients carry less than 90%. Each pound then gives less chlorine and less CYA. The ratio stays about 0.6 ppm of CYA per ppm of chlorine. Our product pages list our trichlor at 90% minimum 7.

Dichlor adds more

Dichlor is the granular stabilized chlorine. Dry dichlor is about 65% available chlorine 13. It is about 59% cyanuric acid 13. So 59 ÷ 65 ≈ 0.9 ppm of CYA for each ppm of chlorine.

The dihydrate grade holds some water. It carries about 55% available chlorine 13 and 50% cyanuric acid 13. That is the same ratio, about 0.9. So a dichlor customer reaches a high reading faster than a trichlor customer. For more on the two grades, see what dichlor is and why it adds more stabilizer.

UK pool guidance from PWTAG gives a rule of thumb. For every milligram of chlorine released, almost as much cyanuric acid is added 12. That fits dichlor well. For trichlor it runs high, because trichlor adds about 0.6.

The review figures earlier in this section are theoretical values for the pure compounds, not the specs of our grades 13. Either form adds about 0.9 ppm of CYA per ppm of chlorine, so across our grades what changes is how much chlorine each kilogram delivers.

TrichlorDichlorCal hypo
Available chlorine92%65%Not relevant
Cyanuric acid in the product56%59%None
CYA per ppm of chlorineAbout 0.6About 0.9None
  • Available chlorine. This is the label strength of pure product; dichlor in this table is the dry grade.
  • CYA per ppm of chlorine. This is the cyanuric acid share divided by the available chlorine. It is what stays in the water with each dose. Dichlor has less chlorine to carry its CYA, so it ends higher. For the full side-by-side, read Trichlor vs Dichlor vs Cal Hypo: Which Chlorine to Stock for Which Customer.

What each tablet adds

Customers count tablets, not ppm. Every tablet that dissolves adds more CYA, and it stays until fresh water dilutes it. How much one tablet adds depends on the tablet's size and the pool's volume.

A bigger tablet or a smaller pool means more CYA per tablet, and ten tablets add about ten times as much as one.

When a customer brings in a high reading, ask first how they dose. Tablets, granules or cal hypo, and roughly how much a week? Then you can explain the number instead of guessing.

Why the CYA level only goes up

CYA is not used up the way chlorine is. Every dose adds a little more, so the reading only climbs. Evaporation does not lower it. Only fresh water brings it down.

When a customer asks how to get it down, the honest answer is water. The way to stop it climbing is a different chlorine.

Only fresh water brings it down

The US model pool code is clear. CYA can only be lowered by diluting the pool with fresh make-up water 9. That code is the Model Aquatic Health Code (MAHC). The CDC writes it, and US health departments can adopt it.

Shocking with dichlor or trichlor makes it worse. A high CYA level stays in the pool after the shock 9. UK pool guidance from PWTAG gives the same fix: dilute with fresh water 12.

Draining alone does not lower the reading. The MAHC gives an example. A pool at 90 ppm is still at 90 ppm after 83% of the water is drained 9. The reading drops only when fresh water goes back in.

Evaporation does not help either. CYA does not evaporate, so topping up only adds water to the same CYA. And some CYA clings to the pool shell, pipes and filter. Even after a full refill, the test can show some 11.

Before you stock a product that promises to remove CYA, ask the maker for test data. Point the customer to fresh water first, and you avoid a refund when the reading does not move.

Why outdoor pools still want some

CYA is not the enemy outdoors. Sunlight breaks chlorine down fast. With no CYA, chlorine in sunlight drops by half within 30 minutes 13. With 25 ppm of CYA, 70% of the chlorine was still there after 3 hours 13. Both figures come from the same 2018 PMC review.

That is why stabilized chlorine has been used in outdoor pools since 1958 14. UK guidance sees trichlor as a fit for outdoor and lighter-use pools 12. The goal is enough CYA, not as much as possible. Salt pools face the same choice; see stabilizer in a salt-pool range.

How much CYA is too much

There is no single number. The limit depends on the rule the pool is held to.

Why do health departments care? CYA makes chlorine work slower. A pool with too much of it can look fine and still fail to kill germs in time.

Public and commercial pools can be closed over CYA. They need a plan before they reach their line.

When a home pool has no inspector, use the model code's 90 ppm line as a sensible ceiling. Tell the customer it is a guide, not their law.

The lines your customers are held to

RuleTop limitAbove it
Industry standard, public pools, 2009100 ppmNot stated
US model code, 202490 ppmDilute; close at 300 ppm
One Illinois county100 ppmDrain to 50 ppm
  • Industry standard, public pools. The public-pool standard ANSI/APSP 2009 puts the top at 100 ppm 13. A 2018 PMC review reproduces that table.
  • US model code. The 2024 MAHC keeps CYA at or below 90 ppm 10. Above that line the pool is out of code and must be diluted back down. At 300 ppm or more, the pool stays closed until it is fixed 10. CDC lists that 300 ppm rule as new in this edition 2. The rule is section 5.7.3.1.3, and it applies only where a state or county adopts it.
  • One Illinois county. Lake County's manual says a pool over 100 ppm must be partly drained 8. The same manual sets the target at 50 ppm or less.

These lines come from different rules for different places. None of them is the one true limit. Save the health department page each public or commercial account is inspected against in its customer file. Then your advice matches the inspector, not a blog.

Why high CYA is a health-code issue

CYA holds on to part of the chlorine. That slows the kill. Cryptosporidium is a chlorine-tolerant germ that causes diarrhea. Kill time is measured as CT: chlorine strength in ppm times minutes. In a CDC lab study with no CYA, reaching the study's kill target took a CT of about 10,500 4. With just 16 ppm of CYA, it took about 31,500, three times as long 4. Both tests used 20 ppm of chlorine.

The model code annex adds that at 50 ppm of CYA the kill target was not reached 9. So after a diarrhea incident, the code wants CYA at 15 ppm or less before the clean-up. CDC tells staff to drain partly and add fresh water until it gets there 1. Before 2016, CDC advice allowed up to 50 ppm for this step 3.

More CYA also means more chlorine is needed. Under the MAHC, pools using CYA must keep at least 2.0 ppm of free chlorine 10. Free chlorine is what a pool test reads. With CYA present, part of it is held in reserve. That is why more CYA needs a higher reading. The annex treats over 45 parts of CYA per part of free chlorine as a hazard that closes pools 9. That ratio lines up with the 90 ppm cap and the 2.0 ppm floor. Divide 90 by 45 and you get 2.0. In short, the more CYA, the more free chlorine the pool needs.

What to tell a customer whose CYA is high

Here are five questions customers ask, with an answer your staff can say as written. Each answer comes with the reason behind it.

PoolTrichlorDichlorCal hypo
Adds CYAYesYes, moreNo
Outdoor, under the limitGood fitFitsFits
Outdoor, near or over the limitPause; resume once CYA is well back under the limitPause; resume once CYA is well back under the limitSwitch to it if calcium hardness allows
Indoor pool or public spaBest kept for outdoor poolsBest kept for outdoor poolsYes
  • Adds CYA. Trichlor and dichlor add it with every dose. Cal hypo adds none.
  • Outdoor, under the limit. Any of the three works. Trichlor tablets are the easy choice here.
  • Indoor pool or public spa. Indoor pools have no sunlight to guard against, so CYA only slows the chlorine. Public spas run hot, so use a chlorine with no stabilizer there, such as cal hypo; the indoor and spa answer below gives the reason.

No local rule for the pool? Use the 90 ppm model code line from the limits section as a reference.

  1. Customer: The CYA reading is high, and the pool runs on tablets. You: Tablets add it every time. Test it weekly. When it nears the local limit, stop adding stabilizer and replace part of the water if needed. Then switch to a chlorine with no stabilizer, such as cal hypo. Why: only fresh water lowers CYA, and an unstabilized chlorine (one with no CYA in it) stops adding more. One Illinois county requires a CYA test once a week 8.

    When is it near the limit? Here is a made-up example. Say tablets add 2 ppm of chlorine a day. At about 0.6, that is about 1.2 ppm of CYA a day, or roughly 8 ppm a week. A pool reading 80 ppm under a 90 ppm line then has about a week left. So switch when the next weekly test would cross the line. If the customer does not know the daily dose, compare the last two weekly tests. The rise between them is the weekly climb.

    How much to drain? Use plain math. To cut the reading in half, replace about half the water with fresh water. For any target, the share to replace is about 1 minus target divided by current reading. A made-up case: from 120 ppm down to 80 ppm, replace about a third of the water. Draining without refilling changes nothing. Test again after the refill.

    Keep the switch safe. Trichlor and dichlor can explode on contact with cal hypo 12. Cal hypo put into a feeder that held trichlor makes nitrogen trichloride, a gas that can explode 12. So the customer needs a clean, separate feeder for cal hypo, and the two are never mixed.

    Watch calcium hardness too. Cal hypo also raises pH, alkalinity and calcium hardness. In hard-water areas, keep calcium hardness on the regular test list. For the switch product, see cal hypo as the unstabilized option.

  2. Customer: Can the pool stay on trichlor? You: Yes, for an outdoor pool that is under its limit. Why: UK pool guidance sees trichlor as better suited to outdoor and lighter-use pools 12. Sunlight is where CYA earns its place.

  3. Customer: It is an indoor pool or a public spa. You: Use a chlorine without stabilizer there. Why: CYA only helps against sunlight. One Illinois county does not recommend trichlor tablets for indoor pools 8. Montana goes further and bans CYA in indoor pools 11. For public spas and hot tubs, Montana's health department does not recommend stabilized chlorine 11. CYA slows the kill of the bacteria behind hot tub itch. A home hot tub is a different case. Dichlor granules suit it, as our guide to which chlorine suits a home hot tub explains. In a small tub, the CYA from dichlor adds up quickly, so test it regularly and advise a partial water change when the reading keeps climbing. The 90 ppm line is a public-pool model-code reference, not a hot tub rule.

  4. Customer: Does the pool need draining before the switch? You: Stop adding stabilizer first. If the reading is near or over the limit, a partial drain is the only way down. Why: the Illinois county manual encourages draining before CYA reaches 100 ppm 8. CDC's guidance for cleaning up after a diarrhea incident says to drain partly and refill with fresh water without stabilizer 1.

  5. Customer: Is cal hypo as strong? You: Pound for pound it is weaker than trichlor tablets, so you will use more of it. But it adds no CYA. Why: powdered cal hypo carries 65% available chlorine 8. Our product pages list cal hypo at 65% or 70% minimum 6. Our grades are on the Calcium Hypochlorite 65% / 70% page.

Two habits help here. Sell a CYA test that reads high levels with every tablet bucket, and remind the customer to test weekly. When a tablet customer's readings keep rising, offer the switch before the next weekly test would cross the line. The new chlorine goes in instead of the tablets, not alongside them.

Stocking for both kinds of customer

Carry both kinds of chlorine. Trichlor tablets and dichlor granules serve outdoor customers who are under their limit. Customers with high CYA, indoor pools and public spas need a chlorine with no stabilizer. Cal hypo serves them where calcium hardness allows. Check calcium hardness before the switch, so cal hypo goes to the pools it suits.

A dealer who stocks only tablets has nothing to sell the customer who must switch.

  • Stabilized range. We supply solid chlorine disinfectants in both kinds. Our product pages list trichlor tablets from 3 g to 500 g, plus powder and granules 7. See Trichloroisocyanuric Acid (TCCA) 90% for the sizes.
  • Unstabilized range. Our cal hypo pages list granules, pellets, tablets and 300 g sticks 6.
  • pH advice. Trichlor tablets are acidic, about pH 3.0 8. Cal hypo pushes the other way: as noted above, it raises pH and alkalinity. So after a switch, expect pH to rise, and stock pH reducer alongside.
  • Who holds the stock. The model code annex advises pools not to stockpile unstabilized chlorine for emergencies, because it weakens over time 9. So keep it available for them, and sell your own stock oldest first.
  • Freight. Under US rules, dry dichlor ships as a dangerous good: Division 5.1, the hazard class for oxidizers, under UN 2465. That means hazmat packing, labels and papers, so freight costs more. That entry applies to our 56% and 60% dichlor grades. A US footnote called special provision 28 says the dihydrate is not a Division 5.1 oxidizer unless it meets another hazard class 5. Get Section 14, the transport part of each grade's safety data sheet (SDS), with the quote, and cost freight per grade; your forwarder confirms sea or air.

Give cal hypo its own clearly signed shelf section. Keep it off the shelf and pallet that hold trichlor or dichlor, for the contact risk covered above 12. Add a short card saying who should use it.

Each quarter, the dealers who buy from us order trichlor and cal hypo in roughly equal amounts. That is our sales experience, not a market statistic, and cal hypo still ships in its own container.

Test, switch at the limit, and stock both kinds

Trichlor does raise CYA, about 0.6 ppm for each ppm of chlorine. Dichlor raises it faster. It stays until fresh water dilutes it.

So tell outdoor customers to test and stay under their local line. Have high-CYA customers stop adding stabilizer and replace part of the water if needed. Then move them to a chlorine with no stabilizer, such as cal hypo. Indoor and public-spa customers need one too. And keep both kinds in stock.

See product specifications for our trichlor, or browse more guides in Application & Troubleshooting.

References

  1. CDC: Fecal Incident Response Recommendations for Aquatic Staff — 2018-06-22
  2. CDC: Model Aquatic Health Code – Our Work (5th Edition changes) — Originally published: 2024-05-15; Version read: 2025-09-09
  3. CDC MMWR 65(28): Notes from the field / 2016 MAHC update on cyanuric acid — 2016-07-22
  4. PMC10919751: Cryptosporidium inactivation with free chlorine in the presence of cyanuric acid — 2024-03-07
  5. eCFR: 49 CFR Part 172 Subpart B, Hazardous Materials Table and Special Provisions — Version read: 2026-10-21
  6. Kingnod: Calcium hypochlorite 65%, 70% product page
  7. Kingnod: Trichloroisocyanuric acid (TCCA) product page
  8. Lake County Health Department (IL): Swimming Facility Manual — 2024-08-26
  9. CDC Model Aquatic Health Code, 5th Edition (2024), Annex — 2024-12
  10. CDC Model Aquatic Health Code, 5th Edition (2024), Code Language — 2024-12
  11. Montana DPHHS Food & Consumer Safety: Fact Sheet on Cyanuric Acid and Stabilized Chlorine Products
  12. PWTAG Code of Practice — 2021-07
  13. PMC6178841: Wahman (2018), Chlorinated cyanurates: review of water chemistry and associated drinking water implications — 2018-09
  14. PMC6223631: review of chlorinated isocyanurates as free chlorine sources — 2018

Find the Right Pool & Spa Products
for Your Market

Get product recommendations, flexible packaging,
and export support tailored to your business.

Welcome to Contact

Your details stay private. Privacy Policy

Request a Sample

Your details stay private. Privacy Policy