Water Balance

Water Balance: buying guide

Kingnod supplies two pH balancers for pool and spa ranges. Soda ash (sodium carbonate) is our pH Plus, and sodium bisulphate is our pH Minus, used to lower pH. Soda ash comes in light and dense grades. We also supply cyanuric acid (CYA), a pool chlorine stabilizer, as 8–30 mesh granules.

Established in 2009, Kingnod produces and exports water treatment chemicals for importers, distributors and brands. This page compares the three products, sets out what to check when you plan a range, and covers ordering terms. Our full range is under Products.

pH Plus, pH Minus and cyanuric acid side by side

The three products differ in role, form and shipping class. The table compares them on the same points.

Soda ash (pH Plus)Sodium bisulphate (pH Minus)Cyanuric acid (CYA)
Sold aspH PluspH Minus, used to lower pHPool chlorine stabilizer
ChemicalSodium carbonate, Na2CO3Sodium bisulfate, NaHSO4Cyanuric acid
Grades and formLight: white crystal powder. Dense: granular. Both suppliedGranules8–30 mesh granules; powder also available, its specification confirmed with your quote
Main contentLight: Na2CO3 99% min. Dense: total base content 99.6% min, dry basis (COA standard value)NaHSO4 ≥95% (COA standard value)Granules: cyanuric acid ≥98.5% (specification sheet standard)
Packing50 kg fibre drums; 25 kg or 1000 kg bags with pallets; 0.5–5 kg drums in cartons, such as 12 x 1 kg or 4 x 5 kg50 kg fibre drums; 25 kg or 1000 kg bags with pallets; 0.5–5 kg drums in cartons, such as 12 x 1 kg or 4 x 5 kgGranules: 25 kg woven bags (standard); other packing on request
Transport classNot restricted under ADR/RID, no UN numberUN 1759, Class 8, packing group IIGranules: no UN number allocated

Sodium bisulphate impurity limits are on Sodium Bisulphate (pH Minus), with soda ash details on Soda Ash (pH Plus); the COA and MSDS for these two are available on request. The cyanuric acid specification sheet and MSDS are on Cyanuric Acid (CYA).

What to check when you plan a balancer range

This category has two groups: pH adjusters (soda ash and sodium bisulphate) and a stabilizer (cyanuric acid). For the pH adjusters, four checks shape a range: which reading needs correcting, why both directions matter, dry or liquid acid, and how the two lines are stored.

pH or total alkalinity. Stock soda ash to raise pH. Raising total alkalinity with less effect on pH is a separate adjustment. The difference is explained in What Is pH Increaser for Pools? Soda Ash vs Baking Soda.

Both directions. The CDC recommends pH 7.0–7.8 for pools and hot tubs, and chlorine kills germs less well as pH rises. Water can drift above or below that band. A range with only one of the two products leaves your customers without a way to correct the other side.

Dry or liquid acid. To lower pH, a Montana public health training guide lists sodium bisulfate. Sodium bisulphate suits customers who prefer a dry acid. PWTAG, the UK Pool Water Treatment Advisory Group, notes that a powder is thought to reduce mixing accidents compared with a liquid. Other trade-offs are compared in Sodium Bisulfate vs Muriatic Acid: Which pH Reducer to Stock.

Storage. Store the two lines apart, and keep sodium bisulphate away from chlorine products. Soda ash reacts strongly with acids to form carbon dioxide, so its MSDS says not to store it with acids. The sodium bisulphate MSDS asks for locked, dry storage and lists oxidizing agents and alkalis as incompatible. It also warns against mixing it with hypochlorite bleach. PWTAG explains why: an acid mixed with hypochlorites produces chlorine gas.

The stabilizer: cyanuric acid. Cyanuric acid (CYA) is the pool chlorine stabilizer in this category, separate from the pH adjusters above. Its specification and MSDS are on Cyanuric Acid (CYA).

Product pages in this category

Further reading for range planning

Packing, samples and ordering

Packing and OEM. Soda ash packaging is made to your requirements. For OEM soda ash, we can print the drums or bags directly or apply labels. Sodium bisulphate is offered in standard or OEM packaging for export.

Minimum order and loading. Soda ash and sodium bisulphate each start at one full container, and OEM orders have the same minimum as standard orders. The two products cannot share a container: soda ash ships as general cargo, while sodium bisulphate ships on its own as Class 8 dangerous goods. The load per container varies with the packs you pick, and no one figure covers every pack type.

Samples. We keep retained samples from your bulk batch.

When you contact us for a quote, include:

  • Which products you need: soda ash, sodium bisulphate, cyanuric acid
  • For soda ash, light or dense grade
  • Pack type, size and count
  • Standard or OEM packaging, with label artwork for OEM
  • Quantity
  • Destination port and trade term

Find the Right Pool & Spa Products
for Your Market

Get product recommendations, flexible packaging,
and export support tailored to your business.

Welcome to Contact

Your details stay private. Privacy Policy

Request a Sample

Your details stay private. Privacy Policy