What Is Dichlor (SDIC)? Dihydrate vs Anhydrous Explained
Dichlor is sodium dichloroisocyanurate (SDIC), a dry chlorine that dissolves fast and brings its own stabilizer. In water it releases free chlorine within seconds 6.
It comes in two forms. The dihydrate holds water inside its crystal, and the anhydrous form is dry. For a brand, the form matters as much as the percentage on the drum. For granular shock and spa chlorine, our 56% and 60% granules dissolve fast and give a near-neutral solution 8 6 9. Check the shipping class on the SDS (the product's safety data sheet), since these grades ship under UN 2465 8. For tablets we would use anhydrous, the drier and stronger grade.
We supply and export dichlor for distributors and brands. These are the points we would give a new product manager.
- In the FAO/WHO JECFA specification, the pure dihydrate has about 55–57% chlorine and pure anhydrous has 62% or more 7.
- In the US, anhydrous dichlor ships as a dangerous good 3. The dihydrate does not, unless it meets another hazard class 3.
- We recommend it for granular shock, spa chlorine and fast-dissolving tablets.
- Each dose adds almost as much stabilizer as chlorine.
- Ask for the form and SDS Section 14 with every quote.
What dichlor is, in plain words
Dichlor is one chemical with three names. Sodium dichloroisocyanurate is the full name. SDIC and NaDCC are short names for the same thing. Two quotes that use different names can be compared as one item.
Is dichlor the same as chlorine?
Yes. In water it breaks down in seconds and releases free chlorine 6. Free chlorine is the part that kills germs.
Part of its chlorine stays bound as a reserve. That reserve comes out as the free chlorine gets used up 6.
Dichlor also adds stabilizer. The stabilizer is cyanuric acid, or CYA, and it shields chlorine from sunlight. Adding dichlor is like adding chlorine and stabilizer together, in a fixed ratio 1. That is why people call it stabilized chlorine.
When a customer asks if dichlor is chlorine, the short answer is yes, with stabilizer in the same scoop.
What "available chlorine" on the label means
Available chlorine is the share of the product that works as chlorine. It is the reactive, oxidizing form of chlorine 10. The figure compares the product with chlorine gas, which counts as 100% 10.
So a 56% grade gives a little over half the chlorine of the same weight of chlorine gas. A higher number means less product for the same dose.
Dihydrate vs anhydrous: the difference is water
The two forms look the same in the drum; the difference is water held in the crystal.
The two forms differ by water held inside the crystal. The dihydrate carries water and has less chlorine. The anhydrous form is dry and has more, so customers use less of it per dose.
Dihydrate and anhydrous side by side
The table shows reference values for the two pure forms, not our grades.
| Dihydrate | Anhydrous | |
|---|---|---|
| Available chlorine | 55–57% | 62% or more |
| Water lost on drying | 11–14% | 3% or less |
| CAS number | 51580-86-0 | 2893-78-9 |
| Product for 1 mg/L chlorine | About 1.8 mg/L | About 1.6 mg/L |
- Available chlorine. This is the strength range in the FAO/WHO JECFA specification 7. In theory, pure dihydrate is 55% and pure anhydrous 65% 11.
- Water lost on drying. This is the spec test that separates the two forms 7. It counts crystal water plus any surface moisture.
- CAS number. A CAS number is the registry ID that names a chemical. The two forms have different ones in the reference spec 6.
- Product for 1 mg/L chlorine. In pool water, 1 mg/L is the same as 1 ppm. For the same chlorine, the pure dihydrate takes about one-eighth more product than pure anhydrous 6.
These specs come from drinking-water standards. The Indian standard IS 15773 also splits the two. It calls the dihydrate Type 1 and the anhydrous form Type 2 5.
Heat matters for the dihydrate. It starts to lose its crystal water at 40°C (104°F), so keep it cool 6.
Where 56% and 60% fit
For these two grades, our product page lists 56% and 60% minimum available chlorine 8.
A COA is the test sheet for one batch. It shows what that one lot tested, not which form it is. Our 60% batch tested 61.10% against its 60% minimum. A lower number on a label can also mean a blend with other ingredients.
To compare our grades, or a quote from another factory, price each grade per kilo of available chlorine. A 60% grade carries more chlorine per kilo than a 55% or 56% grade.
Before you book any grade, check the shipping class in Section 14 of that grade's SDS; the next section explains the US rules behind it. Our SDIC grades and specifications page lists every grade we supply.
Comparing quotes from two factories? Ask each to write the form next to the grade and send that grade's SDS, so you compare like with like.
Which form ships as dangerous goods in the US
In the US, the form decides it. Dry or anhydrous dichlor ships as a dangerous good. The dihydrate does not, unless it falls into another hazard class.
Dry trichlor and hydrated cal hypo also ship as dangerous goods. For your business, that means higher freight, hazard labels, a trained shipper and fewer carriers. So two dichlor offers at one price can land at different costs.
Dihydrate, anhydrous and the US hazmat rules
A UN number is the four-digit ID carriers use for a dangerous good. Division 5.1 is the class for oxidizers, chemicals that can feed a fire. Dry dichlor and its salts are listed as UN 2465 in Division 5.1 3. The US emergency guide lists sodium dichloroisocyanurate by name under that number 2.
A footnote in the same table changes things for the dihydrate. It says the dihydrate does not meet the oxidizer test 3. So it falls outside the US hazmat rules, unless it fits another hazard class 3.
Section 14 of the SDS is the part that says how a product ships. Get the SDS of the exact grade before you book.
Our product page lists UN 2465 as the dangerous-goods entry for the product 8. That entry covers our 56% and 60% grades. The SDS for your lot should show the same class in Section 14.
When you quote our 56% and 60% grades, cost both with UN 2465 dangerous-goods freight 8, and build that freight into each grade's landed price.
The codes behind this: 49 CFR 172.101 lists UN 2465. Special provision 28 in 49 CFR 172.102 carries the dihydrate footnote. Dry trichlor is UN 2468 3, and hydrated cal hypo is UN 2880 3, both Division 5.1.
Not hazmat is not the same as harmless
Outside the freight rules, the dihydrate still needs care: a large mass can start to break down on its own when it gets hot, as the storage section below explains. The oxidizer classification ("may intensify fire") on the ILO/WHO international chemical safety card applies to anhydrous SDIC, CAS 2893-78-9 4.
For your own shipment, plan on the transport class in Section 14 of that grade's SDS; your forwarder books against it. Our guide to UN 2465 for anhydrous SDIC and its HS line covers sea freight and customs.
What dichlor does to stabilizer and pH
Every dose of dichlor adds almost as much stabilizer as chlorine.
On pH, dichlor is close to neutral when it dissolves. That makes it easy to dose into pool and spa water.
For a pool that already has plenty of stabilizer, use a chlorine that adds none for the daily dose.
Stabilizer: the benefit and the catch
Stabilizer protects chlorine from the sun. But it builds up, because chlorine gets used up and stabilizer does not. Stabilizer also slows how fast chlorine works. Replacing part of the water is the practical way to lower it.
In theory, by weight, anhydrous dichlor is 59% cyanuric acid and the dihydrate 50% 11. Once stabilizer passes 100 ppm, one county pool code requires partly draining the pool 9.
A short line on your label helps. Tell users to test stabilizer and switch chlorine when it runs high. That saves cloudy-water complaints and returns. Our article on the stabilizer dichlor adds per ppm of chlorine covers the build-up maths.
pH and calcium next to trichlor and cal hypo
A county pool manual lists dichlor as neutral in its pH-effect table, next to trichlor, which lowers pH, and cal hypo, which raises it 9. The same manual gives granular dichlor a pH of 6.8 9.
Dichlor adds no calcium to the water, unlike cal hypo 1.
For the full picture of the three chlorines, see trichlor vs dichlor vs cal hypo. Buyers comparing the families can also browse our Disinfectants.
Which grade for which product in your line
Use dichlor where fast dissolving and near-neutral pH matter. That means granular shock, spa and hot tub chlorine, and fizzing tablets. Leave slow tablets for floaters and feeders to trichlor.
- Granular shock and spa chlorine. Use our 56% and 60% granules. As noted up top, they dissolve fast, give a near-neutral solution and ship under UN 2465, so check the SDS before you book 8 6 9.
- Effervescent and plain tablets. Use anhydrous, the drier and stronger grade. Confirm the form in writing and on SDS Section 14. Crystal water can come out of the dihydrate in warm storage, as the forms section explains. A small tablet also needs as much chlorine per gram as it can hold. The cost is freight: a grade whose SDS lists UN 2465 ships as an oxidizer in the US.
If you do press tablets from the dihydrate, pack them moisture-tight and keep stock cool.
On solubility, an AWWA paper reports that dichlor is far more soluble in water than trichlor 1. That compares how much dissolves, not how fast. Dichlor is usually spread straight into the water, and it does not add to scaling, which helps in hard-water areas.
Granular shock and spa chlorine
Pool operators know dichlor as granular chlorine 9. Our product page lists powder and granules in 8–30 and 20–60 mesh 8. Mesh is the granule size on the spec sheet. A smaller mesh number means coarser granules, so 8–30 mesh is coarser than 20–60 mesh 8.
- Granular shock. Hand-dosed shock needs granules that pour well and dissolve fast. Ask for coarser granules here, so users get less dust. Finer powder suits tablet pressing, where coarse grains crumble.
- Spa and hot tub chlorine. Small spa water needs gentle pH and quick dissolving. Dichlor granules fit that job. For spa ranges, bromine is the other option to offer.
Effervescent and plain tablets
Effervescent tablets fizz and dissolve quickly. Dissolving time depends on tablet size and water temperature. Our product page lists them at 1, 3.3 and 4 g. It lists plain tablets at 20, 150 and 200 g 8.
- Effervescent tablets. Pack them moisture-tight, in sealed foil or tight tubs, one dose per strip where you can. Damp tablets swell and break down in the pack, and that ends in returns.
- Plain tablets. For a slow-feed tablet in a floater, sell TCCA 90% tablets instead.
See our Sodium Dichloroisocyanurate (SDIC) page for current forms and sizes.
What to write in the inquiry and check on the COA
An inquiry that names seven things gets quotes you can compare. Then check the first COA, the certificate of analysis, line by line before you pay the balance.
What to write in the inquiry
- Form. Dihydrate or anhydrous, confirmed in writing.
- Minimum available chlorine. For example, 56% minimum.
- Water limit. The moisture range you accept.
- pH of a 1% solution. The range you accept.
- Size. Granule mesh or tablet weight.
- Pack and label. Drum, bag or retail pack, and whose label.
- SDS Section 14. So you know how it ships.
Reading the first COA
Our 56% COA shows the grade and the granule size in its specification line. Its standard values are 56% minimum available chlorine and, for a 1% solution, pH 5.5–7.0. Write the pH and moisture range you accept into the PO.
Check the dates too. On these two batch sheets, the 56% COA gives an expiry five years after production. The 60% COA gives three years.
Water is the line to settle in the order. For the 60% grade we set 5% maximum. For the other grades, or for a given lot, ask us by email or through the inquiry form.
Current specs for each grade are on our SDIC product page. Ask for the COA of the batch you will receive. Its batch number should match the drum labels on your shipment, so you pay for the batch you receive.
If a COA line falls outside your order, note each difference against the order. Raise it before you pay the balance. Under our contract terms, goods that do not match the specification are recalled or compensated.
The FAO/WHO JECFA specification also caps salt at 2% 7. Use it as a reference line, not a US legal limit.
Minimum order and samples
Our minimum order for dichlor is one full container, the same for OEM packs. Dichlor can share that container with trichlor, but not with cal hypo. How much fits depends on the pack you choose.
Is your first dichlor order smaller than a container? Ask for a quote that splits one container between dichlor and trichlor, to avoid tying cash up in one product.
Before you order, ask us for the SDS of that grade and a recent batch COA, and compare them. Before the balance is paid, we keep a retained sample from the bulk batch ourselves rather than mailing one.
Storing it: dry, apart and in the original drum
Keep dichlor in its original drum with the liner closed, away from anything that burns 4. Our standard drums come with inner liners and desiccant, usually two liner layers. Tie the liner shut after each use.
In storage, dichlor reacts violently with cal hypo, alkaline products and acids 4. So the drum stays sealed until use, and cal hypo sits in its own zone with its own scoops. The store itself should be closed, fireproof and dry 4.
Heat matters too. For a large mass of the dihydrate, self-heating breakdown can start at an estimated 45–65°C 12. So keep the store cool; the shipping section explains why a freight exception does not change this.
For the full warehouse rules, see our storage rules for oxidizing pool chemicals.
Pick the form first, then the strength
Dichlor is chlorine with stabilizer built in. Pick the form first, because it sets the chlorine content and the US freight. Then pick the product: our 56% and 60% granules for shock and spas, anhydrous for tablets.
Get the written form, SDS Section 14 and the batch COA before you pay the balance. Keep the drums sealed, cool and away from cal hypo.
See product specifications for our SDIC, or browse more Product Guides & Comparisons.
References
- PMC6490687: AWWA Water Science paper on dichlor and trichlor as chlorine sources (2019) — 2019
- NOAA CAMEO Chemicals: UN/NA 2465
- eCFR: 49 CFR Part 172 Subpart B, Hazardous Materials Table and Special Provisions — Version read: 2026-10-21
- ILO/WHO ICSC 0437: Sodium dichloroisocyanurate — 2022-12
- IS 15773:2008 Sodium dichloroisocyanurate – specification (Bureau of Indian Standards) — 2008-04
- FAO/WHO JECFA 61st meeting: Sodium dichloroisocyanurate, Chemical and Technical Assessment (2004) — 2004
- FAO/WHO JECFA specifications: Sodium dichloroisocyanurate (FNP 52 Add 11, 2003) — 2003
- Kingnod: Sodium dichloroisocyanurate (SDIC) product page
- Lake County Health Department (IL): Swimming Facility Manual, Table 3 — 2024-08-26
- CDC Model Aquatic Health Code, 5th Edition (2024), Code Language — 2024-12
- PMC6178841: J Am Water Works Assoc review of chlorinated cyanurates (2018) — 2018-09
- PubChem: Sodium dichloroisocyanurate dihydrate (CID 23667638), safety and hazard data — Version read: 2026-10-24


