Bromine Tablets in a Hot Tub: The Answers Your Staff Should Give

Bromine Tablets in a Hot Tub: The Answers Your Staff Should Give

Bromine tablets go in a floater or an in-line feeder, not loose in the tub. A home tub follows its label first, and a hire or public tub follows the local health code; within that, have your staff aim for 4 to 6 ppm, the target UK guidance uses 5. That sits inside the 4 to 8 ppm CDC gives for hot tubs 3. ppm means parts per million, the unit on a test strip.

If you run a spa store or a service team, this is the answer sheet for your staff. Everyone at the counter and in the van should say the same thing.

We supply BCDMH bromine tablets to spa distributors. The short script we give the teams who sell them is further down, in the staff script section, ready to print.

The short answer: tablets go in a floater or feeder, not loose in the tub

A capped floater in a hot tub and a separate inset of a closed in-line bromine feeder on return pipework, with a loose tablet crossed out on the tub floor.

Bromine tablets go in a floater or an in-line feeder, not loose in the tub.

BCDMH is the active ingredient in most bromine tablets. It is a white pressed tablet that releases bromine as it slowly dissolves.

A floater is a small floating basket with an adjustable opening. An in-line feeder, called a brominator, sits on the pipework. It runs part of the tub's water past the tablets.

UK guidance from HSE (HSG282, 2017) calls BCDMH a slow-dissolving tablet made for a brominator 5. The same guidance says BCDMH granules can also come in a pre-filled feeder, which may float 5.

Why not just drop them in? A tablet on the floor or a seat dissolves in one spot. It can mark the shell, and nobody controls how much goes in. HSG282 says solid sanitizers such as BCDMH should go in through a dispenser 5. In the UK, home-style tubs used in a business are usually dosed through an in-line feeder 5.

How many tablets? There is no single count. It depends on the tub, how much it is used and the tablet. Plain BCDMH dissolves more slowly than blended bromine tablets. HSG282 adds that other bromine blends are more acidic and dissolve faster 5. So the same floater setting gives a different output with a different tablet.

That is why staff set the floater opening by the test reading, not by a tablet count. For refills, check the floater each time the water is tested, and top it up before the tablets are gone.

A feeder is not a general container either. Under the US model code, a flow-through feeder only takes the chemical, size and shape its maker names 9. When you stock floating dispensers for our tablets, ask us which floater takes our tablet before you order, because the tablet has to fit the floater's opening. An order for both ships in separate containers: bromine tablets travel alone as dangerous goods, and floaters ship as general goods. Take that as a general guide; we confirm the shipping plan for each order.

For the business, every first sale of tablets needs a floater, or a check that the tub already has a brominator. Before the first sale, ask what the tub has: a built-in brominator takes the tablets; without one, a floater goes in the bag.

What bromine level to hold, and why the numbers you see differ

One number for staff

Give your staff one daily target and one soak line. Before any number, though, ask whose tub it is.

A home tub follows its product label. A hire or public tub follows the local health code. In the US, the model code sets the range for public spas:

Public spas under the US model code: 4 to 8 ppm bromine while open. 9

Inside those rules, staff work with two lines. The daily care target is 4 to 6 ppm, the total bromine UK guidance (HSG282, 2017) aims for; it writes mg/l, which is the same as ppm 5. The soak line comes from CDC, which tells hot tub users to look for bromine at 4 to 8 ppm and pH 7.0 to 7.8 3. Under 4 or over 8, nobody soaks. These two lines are our store convention, built on those sources; they are not an official rule.

Why do the numbers differ? Each source does a different job. The US model code sets the lowest and highest level a public spa may run. CDC gives users a range to check. UK guidance gives operators a target.

Why is a normal bromine number bigger than a chlorine one? The US model code annex says bromine is required at higher levels than chlorine, almost twice as much in spas 8. So a bromine reading cannot be compared directly with a chlorine reading. A bromine number in range does not mean the water is too strong, so it is not a reason to close the floater.

pH, and why stabilizer does nothing

pH tells you how acid or alkaline the water is. Keep it between 7.0 and 7.8, the same range CDC gives hot tub users in the soak line 3. Alkalinity is the water's buffer that keeps pH from jumping, so keep it steady too; then pH is much easier to hold in range.

Bromine copes with high pH better than chlorine. At pH 7.5, 94% of bromine is in its active form, HOBr (hypobromous acid), the US code annex reports. Chlorine without stabilizer has under half of its strength in that form 8.

Stabilizer, or cyanuric acid (CYA), protects chlorine from sunlight. It does nothing for bromine 8. So leave it out of a bromine customer's basket: it adds cost and does nothing for the water. A customer moving from chlorine often asks for the usual stabilizer. Explain that it only protects chlorine; you lose a small sale and avoid a complaint later.

Does pH drift with tablets? The tablets themselves are acidic, so pH is worth watching. Even so, PWTAG, the UK pool water group, says BCDMH often needs no pH correction 10.

Our advice to staff is simple: test pH every time, and adjust only when the reading says so. When pH sits high, a pH reducer brings it down. See pH minus for spas for the two common choices.

Starting a fresh fill, and why bromine still needs shock

Cycle diagram showing tablets supplying active bromine, active bromine reverting to bromide, and shock feeding the reactivation arrow from bromide back to active bromine.

Tablets make active bromine; used bromine falls back to bromide until shock turns it back.

Bromine tablets bring their own bromine. When they dissolve, they form the active form, HOBr. So a fresh fill starts simply.

  1. Load tablets in the floater, or check the brominator.
  2. Shock the water as the label directs.
  3. Test bromine and pH, and open the tub once bromine is inside the soak line from the level section and pH is in range; the daily target applies after that.

Tablets need no bromide starter. A bromide starter, sodium bromide, belongs to a different, two-part bromine system. It puts bromide, a resting form of bromine, into the water. On its own it does not sanitize. Shock, an oxidizer, then turns that bromide into active bromine. An oxidizer is a strong chemical that reactivates used bromine and burns off waste.

So what does a starter change for a tablet tub? Tablets alone build the reading, only slowly, because they dissolve slowly 5. A sodium bromide start plus shock gets there faster, but it adds a second bottle to the sale and is not a required step. If the product label asks for a starter, follow the label.

Why does shock stay on the list for tablets? As bromine cleans, it falls back to bromide. Chlorine and other oxidizers turn it back into active bromine. The tablets release some chlorine themselves. Even so, a tablet tub still needs regular shock, just as a chlorine tub does.

Shock is a strong dose of oxidizer. For the two-part system, the oxidizer can be potassium monopersulfate, a non-chlorine shock, or it can be chlorine. For tablet tubs, the product label sets which shock and how often, including any extra shock it calls for.

Service companies that hire out tubs have more fresh fills. After every hire, UK guidance (HSG282) has the tub completely drained, cleaned, refilled, disinfected and drained again 5. For the next hire it is filled fresh and starts like any fresh fill, with the three steps above.

A shock product goes with the first bucket of tablets, and a starter bottle only when the label asks for one.

Testing bromine without getting fooled by the kit

Test total bromine, with a test made to read bromine. Bromine that has reacted with sweat and waste, called combined bromine, still cleans the water. So tests read total bromine and do not split it out, HSG282 explains 5.

Two test mistakes make a good tub look bad.

First, a strip with only a chlorine scale does not give a bromine number. Buy strips that measure the sanitizer you use. See pool and spa test strips for the strip range.

Second, a chlorine kit gives a chlorine number. Kit makers multiply it by 2.25 to get bromine, the US code annex explains 8. A tech who forgets the multiplier sees bromine far too low.

Quick check: chlorine kit reading × 2.25 = bromine. 8

Very high readings have their own trap. DPD is the common tablet test that turns the sample pink. At 10 mg/l or more, the color can bleach out. UK health guidance from 2006 says to dilute the sample and test again 4. Then multiply back by the dilution.

How often should staff test? CDC says public and display tubs should be tested at least twice a day 2. For home tubs, the label and your store routine decide. For a full DPD walkthrough, see our guide to reading a DPD or bromine-scale test.

When a customer says the floater is full but the strip shows nothing, read the strip label first: does it read bromine?

When readings are off or a customer complains of itch

Low readings: check in this order

When a call comes in about a low reading, check in this order, cheapest first. Add tablets only after the list is done, because a wrong test or a stuck floater reads the same as a low tub.

  1. The test. Use a bromine strip, or a chlorine kit read with the multiplier from the testing section. Without it, bromine looks low.
  2. The floater, and tablets that will not dissolve. Is the opening set too low, or is it empty? Is it stuck in a corner with little water flow? Do the tablets match it? The two main tablet types dissolve at different speeds.
  3. The cover and the sun. Sunlight destroys bromine quickly, the US code annex says 8. A tub left open in the sun loses its level.
  4. A fresh fill or a drained hire tub. The level starts at zero. Slow-dissolving tablets need time to build it.
  5. Shock. When was the last one? Without regular shock, more used bromine stays as bromide and the reading drifts low.

If every check passes and the reading stays low, test pH, shock, and test again before changing products.

One fit check sits outside the list. A tub with a UV system should not use BCDMH, HSG282 warns, because together they form bromate 5. Bromate is a harmful by-product. The equipment maker's guidance decides the sanitizer for that tub.

High readings

High readings need the opposite moves. Open the floater less or take it out, and leave the cover off. Let the level fall back, and keep the tub closed to bathers until bromine is back inside the soak line from the level section, not just near the daily target.

Itch or rash complaints

Skin complaints need a calm, serious answer. PWTAG records reports of itch and rash linked to BCDMH 10.

So treat the complaint as real and start with the water. Check the bromine level and pH, and make sure the tub is not being run low. Have the customer stop using the tub, then correct the level and pH and shock it. For a hire or public tub, tell the operator. If a rash does not clear or gets worse, the customer should see a doctor; staff do not judge medical questions.

Why bromine tablets get their own floater or feeder

Bromine tablets get their own floater or feeder, because they react with other oxidizers, chlorine tablets included. Trichlor comes as slow-dissolving chlorine tablets. Cal hypo is calcium hypochlorite, a fast-acting chlorine.

One feeder, one chemical

Bromine tablets share a feeder or floater with no other chemical, chlorine included. Keep them away from other oxidizers and from ammonia-type compounds as well.

Chlorine products react with each other too. Dichlor is a quick-dissolving cousin of trichlor. Cal hypo with trichlor or dichlor in one feeder makes nitrogen trichloride gas, which can explode, PWTAG warns 10. A review in the Journal of the American Water Works Association also keeps cal hypo and trichlor or dichlor in separate feeders 1.

The rule for staff is short. A feeder holds only the chemical and tablet size it was made for 10. Mark each feeder and floater for one product, especially in a service van that carries chlorine and bromine together, and keep bromine tablets in their own sealed tub, so nobody refills a feeder with the wrong product.

Chlorine shock in a bromine tub is different

One kind of mixing is normal. Bromine tablets already release some chlorine, and bromine stays the main sanitizer. Chlorine is one of the shocks that work in bromine water, as the fresh-fill section shows. It goes into the water as a shock; chlorine tablets do not go into the bromine feeder. So the tub stays a bromine tub.

Bromine tablets: a feeder of their own, nothing else in it. Chlorine used as a shock in a bromine tub: fine.

That is also why switching back to chlorine takes time. A water change is not required, but it is the quickest way. For the choice itself, see Bromine vs Chlorine for Hot Tubs: Which Should You Stock?

Storing the tablets

In storage, keep bromine tablets, trichlor or dichlor, and cal hypo apart, the US code annex says, and away from other chemicals 8.

Our SDS lists BCDMH as UN 3085: a class 5.1 oxidizer with a class 8 corrosive label, packing group III 7. In plain words, it ships and is stored as a dangerous good that can feed a fire and burn skin. Because it is corrosive, staff handle tablets with dry gloves.

Its list of incompatible materials includes iron, aluminum, copper, acids, bases, oxidizers, reducing agents and organic chemicals 7. It also says to keep the container sealed and dry 7. On the shop floor, give bromine its own bay, apart from the rest of the Disinfectants range and from acids.

The staff script and the starter bag

Give staff one short script. Print it, and keep it at the till and in every service van.

  • Use the daily target and soak line from the level section for bromine, and keep pH between 7.0 and 7.8 3.
  • Tablets bring their own bromine, so no bromide starter is needed unless the label asks for one.
  • Shock on the schedule the label gives.
  • Test with strips that read bromine.
  • Give bromine tablets a feeder of their own, with nothing else in it.
  • Set how many tablets go in the floater by the label and the test reading, not a fixed weekly count.
  • Bromine outside the soak line from the level section? Stop using the tub, then run the checklist or book a tech. The daily target is for care, not the line for soaking.
  • For a hire or public tub, tell the operator straight away, as CDC tells hot tub users 3.

The starter bag for a new bromine customer holds tablets, a floater and a shock product. It also holds strips that read bromine, so the customer tests the sanitizer the tub actually uses. Skip the floater only when the tub has a brominator. Ring the four up together for a first-time customer: a returned bucket costs more than the minute it takes.

If a customer mentions itch or rash, take it seriously. PWTAG says choosing BCDMH means watching for skin complaints 10. Have them stop using the tub, and follow the itch or rash steps in the troubleshooting section.

What we supply: our tablets come in one size, 20 g. Our product page lists BCDMH as 20 g tablets or granules 6, and says packing can be made to the buyer's needs 6. Tablets ship in standard packing, and other packing can be made to order. See Bromine Tablets (BCDMH) for the specs. When the bag includes a floater, use the floater check in the short answer above.

What to hand your staff

Bromine tablets are easy to sell right and easy to sell wrong. Selling them right means one staff number, the daily target from the level section, with pH in range.

It also means regular shock, bromine test strips, and a feeder kept for bromine alone. Hand your staff the script, put the starter bag together, and browse more answers in Application & Troubleshooting.

See product specifications for our BCDMH tablets.

References

  1. Chlorinated Cyanurates: Review of Water Chemistry and Associated Drinking Water Implications (J. AWWA, 2018) — 2018-09
  2. CDC: Controlling Legionella in Hot Tubs (toolkit module) — 2025-06-30
  3. CDC: Preventing Hot Tub Rash — 2025-07-21
  4. Health Protection Agency (UK): Management of Spa Pools, Part 2 — 2006-03
  5. HSE HSG282: Control of Legionella and other infectious agents in spa-pool systems — 2017-01
  6. Kingnod: Bromine tablets (BCDMH) product page
  7. Kingnod SDS RD24001, BCDMH (rev. 2024-01-05) — 2024-01-05
  8. CDC Model Aquatic Health Code, 5th Edition (2024), Annex — 2024-12
  9. CDC Model Aquatic Health Code, 5th Edition (2024), Code Language — 2024-12
  10. PWTAG Code of Practice — 2021-07

Find the Right Pool & Spa Products
for Your Market

Get product recommendations, flexible packaging,
and export support tailored to your business.

Welcome to Contact

Your details stay private. Privacy Policy

Request a Sample

Your details stay private. Privacy Policy