Trichloroisocyanuric acid(TCCA)
Povidone-Iodine (PVP-I) Powder
See other products in this category.
What this product is
Povidone-iodine is a complex of polyvinylpyrrolidone (PVP) and iodine. The SDS also lists it as polyvinylpyrrolidone-iodine complex and iodinated povidone.
CAS number 25655-41-8; formula (C6H9NO)n·xI. The Chinese SDS gives the components as polyvinylpyrrolidone and iodine in a 90%/10% ratio. The product is a red-brown or yellow-brown powder and is very soluble in water. The sample tested for our transport report is described as a brown powder with a weak odour.
We supply and export this PVP-I powder to importers, distributors, brand owners and buyers of chemical raw materials. The data on this page is for our PVP-I powder only; it is not data for povidone (PVP) or other iodine products.
Check the grade and documents your intended use and local rules require, and state them in your quote request.
Specification
The table lists the limits in the Kingnod TDS for PVP-I powder.
| Item | Unit | Specification (TDS) |
|---|---|---|
| Identification | — | A, B |
| Appearance | — | Red-brown or yellow-brown powder |
| Loss on drying | % | ≤8.0 |
| Residue on ignition | % | ≤0.1 |
| Available iodine | % | 9.0–12.0 |
| Iodide ion | % | ≤6.6 |
| Nitrogen content | % | 9.5–11.5 |
| Heavy metals (as Pb) | ppm | ≤20 |
These are the standard limits in the Kingnod TDS, not the test results of a particular lot. If you need a COA for the lot you buy, say so in your quote request.
When you compare offers or a lot COA with this TDS, check the same eight items line by line. Available iodine (9.0–12.0%) and iodide ion (≤6.6%) are two separate limits, so a quote that gives only available iodine does not show iodide ion, nitrogen, loss on drying, residue on ignition or heavy metals. If your use needs a limit that is not in our TDS, state it in your quote request.
Documents and what each one covers
| Document | Version | What it tells you | Limits |
|---|---|---|---|
| TDS | No date | Standard limits for the eight items in the Specification table | Not lot results; no lot number |
| SDS (Chinese) | Revision 05, 2025-06-21 | GHS classification: not hazardous, no pictogram or signal word; storage conditions | — |
| SDS (English) | Revision 02, 2017-05-22 | Not hazardous under Regulation (EC) No 1272/2008 | — |
| Transport classification report No. 202600013802344 | Issued 2025-12-06, effective 2026-01-01 | Sea transport classification under the IMDG Code, 2024 edition | Pack-size scope set out under Transport and storage |
| Lot COA | — | Test results for one lot | Ask for it in your quote request |
The TDS, SDS and transport report are attached to this product.
Transport and storage
The Chinese SDS (revision 05, 2025-06-21) classifies the product as not hazardous under GHS, with no pictogram or signal word. The English SDS (revision 02, 2017) states it is not hazardous under Regulation (EC) No 1272/2008.
For sea freight, Shanghai Institute of Chemical Industry Testing Co., Ltd. (SICIT, CNAS IB0071) issued transport classification report No. 202600013802344 under the IMDG Code, 2024 edition. Its conclusion: under special provision 375 the product is not subject to any other provisions of the IMDG Code, with no packing group. The report applies only where the net mass of solids in each single or inner pack is 5 kg or less, as declared by the applicant, meeting special provision 375 for UN3077. It was issued on 2025-12-06 and took effect on 2026-01-01.
On the same basis, the report's transport checks found it not classified as explosive, flammable, oxidizing, toxic or infectious, radioactive or corrosive for transport purposes.
Keep containers tightly closed in a cool, dry, well-ventilated place, away from oxidizing agents. Strong oxidizing agents are incompatible. The SDS notes that skin and eye contact may cause irritation; follow the SDS for handling and protection.
What to send with your quote request
- Your application and the grade you need, with any pharmacopoeia requirement or limits that are not in our TDS.
- Quantity.
- Pack type and net weight per inner pack.
- Destination port and trade term.
- The documents you need: TDS, SDS, transport report or a lot COA.
FAQ
Is this PVP-I pharmacopoeia grade?
Our data for this PVP-I is the TDS specification. If you need a pharmacopoeia grade such as USP or EP, or its documents, state it in your quote request.
Does it have US EPA registration?
This product is supplied with its TDS and SDS attached. It has no US EPA registration, and we make no disinfection or germicidal claims for it in the US.
Is PVP-I the same as PVP (povidone)?
No. PVP-I is the complex of polyvinylpyrrolidone and iodine. The specification on this page applies to our PVP-I powder only, not to PVP or other iodine products.
How can I check quality before ordering?
Before ordering, check the TDS and SDS, and state in your quote request any limits your use requires.
Packaging
Pack type and net weight per pack are confirmed with your quote.
If you need single or inner packs larger than the transport report covers, say so in your quote request and we will confirm the sea transport classification for that pack with our quote.
Order and Delivery Terms
- Payment term: T/T 30% in advance and T/T 70% against copy of B/L. or 100% L/C at sight.
- Trade terms: FOB, CFR or CIF, as you require.
- Lead time: Orders typically ship about three weeks after confirmation. We confirm the shipping date for each order.
- We take photos of every stage of the process and can send them to you. Before we ship the container, you will have photos and lab test results.
Product Documents
These documents are for reference and may not be the latest versions. Contact us for the current documents.



