Aluminium sulfate (Flocculant)
Polyaluminium Chloride (PAC)
Established in 2009, Kingnod supplies and exports water treatment chemicals. For the other clarifiers and flocculants we supply, see Clarifiers.
Specification
The specification comes from our industrial-grade COA.
| Item | Specification |
|---|---|
| Aluminium oxide (Al₂O₃) | ≥28% |
| Basicity | 40–90% |
| pH (1% aqueous solution) | 3.5–5.0 |
| Water insoluble matter | ≤1.5% |
| Nitrogen (N) | ≤0.01% |
| Arsenic (As) | ≤0.0002% |
| Lead (Pb) | ≤0.001% |
| Cadmium (Cd) | ≤0.0002% |
| Mercury (Hg) | ≤0.00001% |
| Hexavalent chromium (Cr⁶⁺) | ≤0.0005% |
| Appearance | Yellow powder |
| Solubility | Completely soluble |
| Solution colour | Transparent yellow |
The MSDS (PAC-HFS) describes the product as a pale yellow, hygroscopic powder with a bulk density of 0.65 g/cm³ and a pH of 3.5–5.0 in a 1% solution (w/v). CAS number: 1327-41-9. The MSDS figures are physical data, not grade limits.
Where PAC fits in water treatment
The two MSDS for this product both give its use as a water treatment chemical. In its 2024 Model Aquatic Health Code (MAHC) annex, the US Centers for Disease Control and Prevention (CDC) names polyaluminum chloride as an example of a coagulant for pool filtration, and recommends injecting the coagulant ahead of the filters so that the filters capture the particles rather than letting them sink to the pool floor. The annex also notes that overfeeding or underfeeding a coagulant impairs performance.
The PAC on this page is industrial grade. China's current national standard for polyaluminium chloride, GB/T 22627—2022 (Water treatment chemicals — Polyaluminium chloride), covers PAC for industrial water supply, wastewater, sewage and sludge treatment. If you plan to use PAC in pools or drinking water, check the grade and approvals your local rules require and state them in your quote request.
If you need an aluminium sulfate flocculant instead, see aluminium sulfate flocculant.
Finding the right dose for your water
The amount of PAC needed depends on your water and your system, so set the dose by jar testing and send the results or your target dose range with your inquiry. The PAC on this page is industrial grade, and the pool-operation and jar-test notes in this section describe general methods. Before using it in a pool, check the grade your local rules require.
For pools, the CDC's 2024 Model Aquatic Health Code (MAHC) annex recommends a variable coagulant dose, because the dose needed changes with bather load, and both overfeeding and underfeeding impair performance.
For natural raw water, Annex A of China's standard GB/T 22627—2022 describes a jar test for comparing doses on your own water:
- Fill six identical 1000 mL beakers with the raw water and add a different dose to each.
- Mix rapidly at 500–1000 r/min for 30–60 s.
- Flocculate slowly at 20–200 r/min for 5–15 min.
- Let the floc settle for 10–30 min.
- Record when the floc forms, its shape and size, how it settles and the residual turbidity, then read the result from a dose–effect curve or table.
The annex is guidance only, not a requirement: it does not set a general turbidity removal rate or a recommended dose.
In pool filtration, the MAHC annex also notes that coagulation makes filters harder to clean. With water-only backwashing, backwash more often and record the clean-bed head loss, which is the pressure drop across the filter just after it has been cleaned. Keep the coagulant feed switched off while a filter is being backwashed, unless the backwash water is itself filtered water.
If you already have jar-test results or a target dose range, include them in your quote request.
How our COA reads against GB/T 22627—2022
The table sets the Table 1 values for solid PAC in China's national standard GB/T 22627—2022 (Water treatment chemicals — Polyaluminium chloride) beside our industrial-grade COA specification.
| Item | GB/T 22627—2022, solid PAC | Our COA specification |
|---|---|---|
| Aluminium oxide (Al₂O₃) | ≥28.0% | ≥28% |
| Basicity | 20–98% | 40–90% |
| pH | 3.5–5.0 (10 g/L solution) | 3.5–5.0 (1% aqueous solution) |
Sources: GB/T 22627—2022, Table 1; Kingnod industrial-grade COA.
The standard sets its limits for water-insoluble matter and for Fe, ammonia nitrogen, As, Pb, Cd, Hg and Cr on a basis of 10% Al₂O₃, and the values must be converted when the Al₂O₃ content is not 10%. Our COA limits are not written on that basis, so the two cannot be compared item by item. The standard also covers liquid PAC, which has a density requirement; solid PAC has no density limit.
Acceptance is based on the COA specification and the contract agreed with your quote; if your contract needs GB/T 22627 limits, say so in your quote request.
What to send with your quote request
- Your application and the grade you need: industrial grade, or another grade or certification, with any limits for Al₂O₃ or basicity.
- Quantity, in tonnes or full containers.
- Packing: 25 kg woven bags with a PE liner, or your own packing requirement.
- Destination port and trade term.
- The documents you need, such as the COA for your lot or the MSDS.
FAQ
Is this PAC drinking-water grade?
The PAC on this page is industrial grade; the COA file is labelled Industrial grade. If you need another grade or a certification, state it in your quote request so it can be confirmed.
Do you supply liquid PAC?
The product on this page is a powder. If you need another form, ask in your quote request.
Is PAC the same as aluminium chlorohydrate (ACH)?
No. ACH is a different product; the COA and MSDS for this product cover polyaluminium chloride only.
Packaging
Standard packing is 25 kg woven bags with a PE inner liner, and packing to your own requirements is possible. The COA gives a full container load as 25 MT (25MT/FCL).
For reference, China's standard GB/T 22627—2022 also specifies double-layer packaging for solid PAC: an inner polyethylene film bag, with the outer packaging made to the listed standards or to the customer's requirements.
Shipping and storage
For transport, the MSDS (PAC-HFS) gives no UN number and no dangerous goods class for this product. The second MSDS states in Section 14 that it is not regulated as a hazardous material by DOT, IMO or IATA.
Keep the bags sealed in a dry, ventilated place, protected from rain, high temperature and strong sunlight (COA). Store in a cool place out of direct sunlight, away from oxidizing agents and foodstuffs, and avoid severe overheating, which may release hydrogen chloride gas (MSDS). Stored this way, the shelf life is 12 months, which matches the one-year storage period that China's standard GB/T 22627—2022 lists for solid PAC.
When handling, avoid skin and eye contact and breathing the dust; wear overalls, eye protection and gloves (MSDS). The full handling and first-aid information is in the two MSDS.
Order and Delivery Terms
- Payment term: T/T 30% in advance and T/T 70% against copy of B/L. or 100% L/C at sight.
- Trade terms: FOB, CFR or CIF, as you require.
- Lead time: Orders typically ship about three weeks after confirmation. We confirm the shipping date for each order.
- We take photos of every stage of the process and can send them to you. Before we ship the container, you will have photos and lab test results.
Product Documents
These documents are for reference and may not be the latest versions. Contact us for the current documents.



