What Is pH Increaser for Pools? Soda Ash vs Baking Soda
A pool pH increaser is usually soda ash, also called sodium carbonate. It is used when pH is too low 6. pH tells you how acidic or basic the water is.
Alkalinity increaser is usually baking soda, or sodium bicarbonate. It raises total alkalinity with little change in pH 6. Total alkalinity is the water's buffer that holds pH steady. So baking soda is a poor stand-in for pH Up.
We supply soda ash, sold as pH Plus.
- Sell pH Up when a customer's pH tests low.
- When alkalinity tests low and pH is about right, the fix is an alkalinity increaser, not pH Up.
- For the same pH rise, baking soda takes far more product than soda ash and pushes alkalinity much higher.
- Dose pH Up by the test and the label, then retest after the water mixes.
The short answer: pH Up and Alkalinity Up do different jobs
Treat these as two tools, not two brands of one thing. Match them to what the customer's test shows. We would build this part of a Water Balance range on four rules.
- pH tests low: sell pH Up. Soda ash is the usual pH increaser when pH is too low 6. Heavy acid use or a lot of rain can pull pH down, and that is when customers come in for it. Ours is listed as Soda Ash (pH Plus).
- Alkalinity tests low and pH is about right: skip the pH Up. That is an alkalinity job. Raising alkalinity without a big pH change is the work of an alkalinity increaser such as baking soda 9.
- Both test low: check both numbers before dosing. Soda ash lifts pH and alkalinity together 6, so compare both readings with the target range and follow the product label for how much to add. Retest before adding more. pH Up is the one to dose here.
- After any pH Up dose: retest. Soda ash raises alkalinity even when only pH needs fixing 6, so tell customers to retest after the water mixes.
| Soda ash | Baking soda | |
|---|---|---|
| Chemical | Sodium carbonate | Sodium bicarbonate |
| Main job | Raises pH | Raises alkalinity |
| Solution pH | About 11.4 (10 g per liter) 11 | 8.3 2 |
| Alkalinity up 10 ppm | 14 oz 6 | 1.4 lb 7 |
| Sold as | pH Up, pH Plus | Alkalinity Up |
| Used for | Low pH | Low alkalinity, normal pH |
The alkalinity row is for 10,000 gallons, and its two figures come from two public pool references. ppm means parts per million. It is a reference figure, not a label dose, and each product's own label sets its dose. Solution pH is the reading you get when each product is dissolved in water.
Three things are the same for both:
- Both are alkaline. Each one pushes the water away from acid, just not with the same force.
- Both raise total alkalinity. Soda ash does it alongside pH 6; the table row shows how much each takes.
- Both are on the approved list. The US model pool code lists both for pH control 8.
What a pH increaser is, and what an alkalinity increaser is
pH increaser, pH Up and pH Plus are shelf names for one kind of product. In this guide they mean soda ash, or sodium carbonate. The Lake County, Illinois, health department's pool manual says pH increaser is usually soda ash, used when pH is too low 6. Our product page lists soda ash under the alias PH Plus 5.
In this guide, alkalinity increaser, or Alkalinity Up, means sodium bicarbonate. That is plain baking soda.
Why does one move pH so much and the other so little? Both are alkaline, but not equally. Dissolved at about 10 g per liter, soda ash reads about pH 11.4 at 25 °C 11. NOAA chemical data puts a baking soda solution at pH 8.3 2.
Now compare that with the target. Under the US model pool code, pool water stays between pH 7.0 and 7.8 8. Soda ash has a lot of push above that band. Baking soda has very little.
Salt pools need the same pH control, so pH Up does the same job there when pH tests low. For the full list, see the balance chemicals a salt pool still needs.
Why baking soda is a poor substitute for pH Up
A customer may ask if grocery baking soda does the same job as pH Up. For pH, the answer is no.
Baking soda can nudge pH up. But for the same pH rise it takes far more product than soda ash, and every pound of it adds to total alkalinity. The customer gains a little pH and ends up with alkalinity far too high.
The reason is baking soda's own pH. NOAA chemical data puts a baking soda solution at about pH 8.3 2, so the closer the pool gets to 8.3, the more baking soda each step takes.
Baking soda does have its own job: raising alkalinity. The US model code annex gives about 1.4 lb per 10,000 gallons for a 10 ppm rise 7.
When a customer asks for baking soda, ask what they are trying to fix and for the pH and alkalinity readings. Low pH goes to pH Up. That one question saves an alkalinity overshoot and a return visit.
Too much pH Up: cloudy water, scale and high alkalinity
Cloudy water and scale
Two complaints can follow pH Up: cloudy water and scale. They point to two causes. Either too much went in, or soda ash met calcium in the water.
Soda ash raises alkalinity as well as pH, and the alkalinity row in the first table shows how fast. When alkalinity runs too high, pH gets hard to adjust. High pH then brings cloudy water, weaker chlorine, scale and filter trouble 7. Scale is the hard white crust of calcium carbonate that high pH can leave on pool surfaces 7.
A milky haze right after dosing can come from soda ash meeting calcium. This calcium carbonate haze can form for a short time, and filtration can clear it. To avoid it, add soda ash and baking soda several hours apart from calcium chloride and cal hypo. Calcium chloride is a salt used to raise the calcium level in the water. Cal hypo is calcium hypochlorite, a dry chlorine.
So when a customer calls about cloudy water after pH Up, start with their pH, alkalinity and calcium readings. Ask whether a calcium product went in the same day. If one of the two causes fits, the answer is about dosing, and you avoid refunding good product.
Why pH keeps drifting low
Some customers buy pH Up again and again. The US model code keeps total alkalinity between 60 and 180 ppm 8. When alkalinity runs low, pH can drop fast in pools on acidic chlorine, such as trichlor or dichlor 7. For these customers, check total alkalinity as well and keep it within that range, so pH holds steadier between doses. For the full pattern, see how chlorine type moves pH.
The opposite customer overshoots and needs a pH reducer to bring pH back down.
What to ask for when you buy soda ash pH Plus
A soda ash quote is only comparable when it names the grade and the COA standard values that grade is ordered against. We supply two grades, and each is specified against its own COA standard values:
- Soda Ash Lite, a white crystal powder 5. Our product page lists 99% minimum sodium carbonate, 0.5% maximum sodium chloride and 0.004% maximum iron 5.
- Soda Ash Dense, in granules. Its COA sets total base content at 99.6% minimum 3 and sodium chloride at 0.05% maximum, both on a dry basis 3.
A COA, or certificate of analysis, is the lab result for one production batch. Total base content means total alkali, much like assay. Assay is how much of the product is really sodium carbonate. Our Dense COA also reports sodium sulfate, insolubles, bulk density and sieve analysis 3. Insolubles are bits that do not dissolve. Bulk density is how much a set volume of the product weighs. Sieve analysis shows the spread of grain sizes. The results on a COA cover that batch only.
Name these lines in the inquiry:
- Grade, powder or granules, so that two quotes describe the same product.
- The COA standard values for that grade: ask for the COA of the grade you are buying and quote its limits, for Lite and for Dense alike.
- Pack size. Our product page lists standard drums from 0.5 to 50 kg, plus 25 kg and 1,000 kg bags 5, and other packing can be made to order.
- Documents: the SDS and the batch COA. The SDS, or safety data sheet, shows how the product ships and how to store it.
The US standards body ASTM sets out the usual tests for commercial soda ash in its standard E359. They include total alkalinity, bicarbonate, moisture, sodium chloride, sodium sulfate, iron and sieve analysis 1. The standard gives methods, not limits, so the limits still come from the grade you buy.
Storage and shipping are simple next to pool acids. Our SDS lists soda ash as not restricted for road transport under ADR, the European road transport rules, with no UN number, the four-digit ID used for dangerous goods 4. It gives a shelf life of 36 months when kept dry and sealed 4, and it keeps soda ash away from acids 4. A US government SDS agrees for pure sodium carbonate: the US transport department (DOT) and the air-cargo body IATA do not regulate it 10. Blended products follow their own SDS.
On ordering, the minimum is one container. We do not load soda ash and sodium bisulfate, the dry acid sold as pH Minus, in the same container.
When you place the order:
- Book pH Plus and pH Minus as two shipments from the start. Because we load them in separate containers, plan both bookings up front if you buy both from us. That avoids a late re-plan of the range.
- Settle printed packs or labels before ordering. For own-brand pH Up, your brand can be printed on the drums or bags, or applied as a label. Sending the artwork with the order saves relabelling stock after it lands.
The rules to give your sales team
Rules for your sales team:
- Test first.
- Low pH gets pH Up. Low alkalinity with normal pH is an alkalinity job, not a pH Up job. Both low: check both readings against the target and the label, then dose pH Up.
- Baking soda is no stand-in for pH Up, because it barely moves pH 9.
- After pH Up, retest, and keep calcium products apart.
When you buy, name the grade, order against that grade's COA standard values, and ask for the pack, SDS and batch COA. For more side-by-side guides, see Product Guides & Comparisons.
References
- ASTM E359-26 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) — 2026-05-25
- NOAA CAMEO Chemicals: Sodium bicarbonate
- Kingnod: Sodium carbonate (dense) COA, batch 20240605 — 2024-06-05
- Kingnod: Material safety data sheet, soda ash
- Kingnod: Soda ash (PH Plus) product page
- Lake County Health Department: Swimming Facility Manual (August 2024) — 2024-08-26
- CDC Model Aquatic Health Code, 5th Edition (2024) Annex — 2024-12-16
- CDC Model Aquatic Health Code, 5th Edition (2024) Code — 2024-12-16
- Montana DPHHS: Swimming pools and spas training notes
- NIST: SDS for SRM 2192a Sodium Carbonate — 2013-11-19
- PubChem: Sodium carbonate (CID 10340), experimental properties: pH — 2011-01-14


