How to Choose a Pool Chemical Manufacturer in China: 6 Checks Before You Order

How to Choose a Pool Chemical Manufacturer in China: 6 Checks Before You Order

Check every Chinese pool chemical supplier in the same six-step order, and drop it at the first failed paper check. The three paper checks cover who makes it, its licence and its batch documents.

We are a pool chemical manufacturer and exporter. This is the order we would follow if we were the buyer.

  • The three paper checks come before you approve a sample or place an order.
  • The licence type tells you whether you face a factory or a trader.
  • Look the licence up in a public record, not just on the copy you were sent.
  • Ask for the COA of your own batch, not a sample sheet.
  • Trichlor and cal hypo ship as dangerous goods. Dichlor depends on its form.

The short answer: six checks, in this order

Run the same six checks on every supplier, in this order. A supplier that fails one of the first three is out.

The six checks, in order

  1. Who makes it. The plant that produces your product, and any site that repacks or labels it.
  2. The licence. Whether its Chinese licence covers making your chemical, or only trading it.
  3. Batch documents. A COA for a real batch, and an English safety data sheet (SDS).
  4. Sample match. How the shipped lot will be tied to what you approved.
  5. Dangerous-goods packing. Whether it can pack, label and certify an oxidizer pack correctly.
  6. Payment terms. Whether part of your money stays with you until the goods ship.

Six supplier checks in a row, with failed folders from the first three paper checks directed into a lower tray.

Six checks in order: drop a supplier at the first failed paper check before comparing the remaining suppliers.

A supplier is the company that sells to you. A manufacturer is the one that actually makes the chemical. They may be the same company or two different ones.

The first three checks are paper checks. They cost you a few emails, and a failed one ends the talk before any quote, trial order or freight. The last three compare the few suppliers that are left.

Why paper first? Each paper check can rule out a supplier that looks fine on price. In China, a company must hold a hazardous chemicals safety production licence before it makes a hazardous chemical 5. A cheap quote is worthless if the goods cannot legally be made.

Be clear about the product itself before you start. Our guide to which chlorine your customers actually need covers that choice.

One habit saves the most time. As soon as a supplier makes your long list, send one written request. Ask for the business licence, the hazardous chemicals licence and any ISO certificate. Add the latest batch COA and SDS, and the address of the producing plant. Send it to every supplier on the same day. Suppliers that answer with a catalogue sort themselves out before you request a quote or a trial order.

Where your long list comes from matters less

Trade fairs, sourcing platforms and "top 10" lists are fine for finding names. They do not screen anyone. A paid platform badge says nothing about licences or batches. A ranking written by one of the ranked companies is an advert. Put every name through the same six checks; how to confirm who you are really dealing with is Check 1.

Check 1: who makes, packs and labels your product

Find out which plant makes your product before anything else. Licences, COAs and inspections only tell you something once you know which site they describe.

Factory, trader or repacker

Three kinds of seller will quote you. Each can be a good supplier.

FactoryTraderRepacker
Makes the chemicalYesNoNo, repacks bulk
Licence it needsProduction licenceOperating licenceOperating licence with storage
Can name the plantIts own plantNames its source plantSource plant + packing site
What to askPlant addressSource plant addressPlant + packing site addresses
  • Makes the chemical. A factory makes it. A trader buys from one or more plants. A repacker buys bulk and fills smaller packs, and can put your label on them.
  • Licence it needs. In China, trading hazardous chemicals needs a licence, and that includes storing them for trade 5. A producer selling its own goods from its own plant needs no trading licence 5. So the licence a seller shows hints at its role. A repacker stores and repacks chemicals for sale, so it trades them. It needs at least an operating licence that covers storage and names your chemical. How to read and check a licence is Check 2.
  • Can name the plant. A licensed trader may not buy from unlicensed producers or traders 5. So a trader should be able to name its plant. If it cannot, ask for its supply chain in writing, down to the plant. Hold the next step until it arrives, because the documents only mean something once they trace to a plant.
  • What to ask. Get the plant address from each seller by email. A repacker names the plant and its own packing site.

A trader that names its plant can be a good partner. It may combine several products in one container, or handle paperwork for you. The real risk is a seller that calls itself the factory but cannot give a production address.

Supplier websites describe themselves, ours included. Treat any line like that as the start of your check, not the end.

An email answer is something you can match against the licence later. It also protects you if the "factory" changes between the quote and the order.

Match each paper to the right company

Next, make sure every paper belongs to the company it should. The plant's papers belong to the plant, and the seller's papers to the seller. A written link should tie the two together.

Use two things to match them: the Chinese company name and the Unified Social Credit Code. That code is the one registration number printed on every Chinese business licence. Look for both on the business licence, the hazardous chemicals licence, any certificate and the proforma invoice. The proforma invoice is the invoice a supplier sends before you pay, with the product, the amount and the bank account.

The business licence itself comes from the local market registration office, which issues it when it registers the company 6. You can check that registration yourself. The official register is China's National Enterprise Credit Information Publicity System at gsxt.gov.cn. It is in Chinese, so search with the company's legal Chinese name.

The English name will not settle it. The 2022 Foreign Trade Law ended registration for exporters. That registration had been the main way to check a Chinese company's English name. So foreign buyers may need extra checks on their Chinese partners.

Check the money side the same way. The bank beneficiary on the proforma invoice should carry the same Chinese name as the seller's business licence. A sister company or an export agent can be a fair reason for a different name. Get that reason in writing before any deposit. It costs one email and keeps your money away from a company you never checked.

Check 2: the licences, and what they actually cover

For chlorine and other chemicals on China's hazardous chemicals list, a licence shows what a supplier may do. Read four lines on it: the type, the chemicals it covers, the dates and the issuing office. Then find the same licence in a public record before you rely on it.

That list is China's Catalogue of Hazardous Chemicals, published by the national work-safety authority with other State Council departments 4. Ask the supplier to state in writing whether your product is on the Catalogue, and under which entry. If it is not, there is no production or operating licence to ask for. Read the business licence scope instead.

Production licence or operating licence

China's rules on hazardous chemicals set up two separate permissions. The first is for making. A producer must hold a hazardous chemicals safety production licence before production starts 5. The second is for trading. Anyone who trades hazardous chemicals, or stores them for trade, needs an operating licence 5.

So a plant that says it makes your chemical should show a production licence naming it. An operating licence alone marks a trading company. That is fine, as long as it names its plant.

The two licences come from different offices. The provincial work-safety authority issues the production licence 4. It may hand that job to the city or county office where the plant sits 4. So a genuine production licence can carry a provincial, city or county seal.

The operating licence comes after an on-site check of the premises and storage 5. A city-level office licenses traders that hold their own storage, and traders of highly toxic chemicals. A county-level office licenses the rest 3. That split matters 5 when a seller claims storage but shows only a county-issued licence: ask it for the storage site and the licence line that covers it.

Older licences may name a work-safety bureau. In 2018 China merged its national work-safety administration into the new Ministry of Emergency Management 1. An older office name is a sign of an older licence, not of a fake. Check its dates, though: a licence older than 3 years needs a current replacement.

Read type, scope, dates and issuing office

On every licence, read four things.

  1. The type, in the title: production or operating.
  2. The scope, the list of chemicals the holder may make or trade. Your product must be on it.
  3. The dates. A production licence runs 3 years 4, and so does an operating licence 3. The dates must cover your order.
  4. The issuing office. It tells you where to look the licence up.

An operating licence also prints its certificate number, issuing office, issue date and validity 3. A real licence that lists other chemicals, or has expired, does not cover your purchase.

Get the licence translated line by line. Ask a translator for every line word for word: title, holder, credit code, each chemical in scope, dates and issuing office. A summary is where "operating licence" quietly turns into "factory licence", and a trader slips through as a factory.

Look the licence up, not just the copy

A copy can be borrowed or edited. Two public records let you check it.

  • The issuing office's list. The national and provincial authorities must publish regularly which companies hold production licences 4. For an operating licence, the city or county office that issued it publishes its own list of holders 3.
  • China's National Enterprise Credit Information Publicity System at gsxt.gov.cn, the Chinese-language register from Check 1. The company must post any licence it obtains or renews there 2. The issuing department must also publish its licence grants and renewals, there or in another public system 2. So check both places before you decide a licence is missing.

Search with the exact Chinese holder name and credit code from the copy, not the English trade name. The search shows whether the licence belongs to another company. A matching record tells you the copy is real and still in force.

What an ISO 9001 certificate does and does not prove

An ISO 9001 certificate means a certification body audited the company's quality system. It only covers the scope printed on it. A scope such as "sale of pool chemicals" covers selling, not making. And no ISO certificate tells you anything about a batch.

To check one, look it up on the website of the certification body that issued it. If an IAF member accredits that body, IAF CertSearch also shows the certificate's status and scope 9. Search it by company name or certificate number. Since 30 September 2026, China's certification regulator no longer lists on its own website the certificates issued under a body's own rules; certificates under national unified rules can still be looked up there. So a certificate missing from the regulator's site is not invalid for that reason alone. What a batch actually contains is the next check.

Check 3: batch documents, not brochure specs

Licences show what a company may make. Batch documents show what it actually made. Ask for three, and read each for what it can prove.

The batch COA

A COA, or certificate of analysis, is the lab sheet for one production batch. It must carry the batch number of the goods you will receive. It must also show each result next to the limit you agreed.

Here is what a real one looks like, from one past batch of ours. Our trichlor 200 g tablet COA is tied to that one batch number. Available chlorine, the share of the product that works as chlorine in the water, tested 90.04% against a 90% minimum. Moisture tested 0.37% against a 0.5% maximum. Our dichlor 60% granular COA for batch 20260726 shows 61.10% against a 60% minimum.

A supplier that quotes only "purity" has not told you the available chlorine. Ask for that number by name, because it is the one your customers' dosing depends on.

Write the batch rule into your purchase order. The COA batch number must match the marks on the drums or bags. A COA attached to every quote describes somebody's batch, not yours. With the rule in writing, a mismatch is caught while the balance is still unpaid.

Third-party test reports

A report from an outside lab proves the result for the sample sent to that lab. It says nothing about later batches, and it does not certify the supplier. Use it as a first sign the product can meet spec, if the sample came from that plant. Then rely on batch COAs and your own checks for each order.

Our own case shows the limit. Our SGS report on trichlor covers only the available chlorine of the two samples sent to the lab. It is a test report, not a product certification. SGS is a third-party testing company.

Our trichlor product page offers an SGS test report and an MSDS for download 11. MSDS is the older name for an SDS. Files like these are a starting point, not proof for your order.

An English SDS in the US format

An SDS, or safety data sheet, is the standard safety document for a chemical. In the US, the legal duty is yours as the importer. Importers must obtain or write an SDS for each hazardous chemical they bring in 8. It must be in English, with set sections in a fixed order 8. If a supplier cannot give you a usable one, the work and the risk move to you.

Our guide to what to check in a supplier's SDS and COA goes through both documents line by line.

Check 4: make the shipped lot match the sample you approved

A good sample does not prove a good shipment, so match the lot by documents and inspection. Tie your order to one batch in writing, and check that batch before you pay the balance.

Approval does not have to depend on a mailed sample, which matters because chemical samples can be slow or impossible to mail. It rests on the agreed specification on your order, plus one of two checks at loading. One is the batch COA with an inspection. The other is samples your inspector draws from the lot at loading, seals and splits so both sides keep one.

Tie the order to one batch

  1. In the order, say the shipped lot must match the agreed specification.
  2. Ask which batch will ship, and get its COA before the balance is paid. If the order spans several batches, get a COA for each one.
  3. Ask the supplier to keep a retained sample. That is a sealed portion of the bulk lot kept at the plant, ready to test in a dispute.

A batch COA names one batch and its size. The batch number on it is what you look for on the drums.

Check before the balance is paid

Check the batch marks on the drums before you pay the rest, through loading photos or a pre-shipment inspection. A pre-shipment inspection is a check by an inspector you appoint. It happens at the factory or the loading, before the goods leave.

Have the inspector check four things:

  • batch marks against the COA;
  • pack count and weight against your order;
  • no batch shipping more than the quantity on its COA;
  • available chlorine and moisture on drawn samples, against the limits in your order.

Name your inspector in the contract on a first order. Write in the inspection company, the loading date window and what it checks. Without that, the lot may ship with no one checking it, and a wrong lot shows up only after it lands.

Here is how we handle it, as one reference. We accept a third-party inspector named by the buyer at the container loading. We keep a retained sample from the bulk lot. Buyers get photos and lab test results before the container ships 11. Under our contract terms, goods that do not match the specification are taken back or compensated as agreed 11.

Whoever you buy from, get at least this much in writing, with the remedy in the contract. More about who we are is on our About Kingnod page.

Check 5: dangerous-goods packing, and which chlorines need it

Not all chlorine ships the same way. Trichlor and cal hypo ship as dangerous goods, as oxidizers. An oxidizer is a chemical that can feed a fire. That means UN-rated packs, hazard labels, a dangerous-goods booking and higher freight. A UN-rated pack is packaging that has passed UN tests for dangerous goods.

Which chlorines ship as dangerous goods

Dichlor depends on its form. Dry dichlor ships as a dangerous good. For the dihydrate, the transport class is the one given in that grade's SDS. So ask each supplier which form it ships before you price freight.

Check the SDS: its section 14 gives the transport entry, and that entry should match the form the supplier names.

The codes come from the US hazardous materials table. A UN number is the four-digit code a forwarder books dangerous goods under. Division 5.1 is the oxidizer class.

Dry trichlor is UN 2468, Division 5.1 7. Dry dichlor is UN 2465, Division 5.1 7.

Dichlor dihydrate is the exception. Special provision 28 says it does not meet the Division 5.1 criteria 7.

Hydrated cal hypo with 5.5–16% water is UN 2880 7. Dry cal hypo with more than 39% available chlorine is UN 1748 7. Both cal hypo entries are Division 5.1.

Our product pages list trichlor under UN 2468 11 and cal hypo under UN 2880 10. For cal hypo, our guide to specifying cal hypo grade and form goes further.

Send each product's SDS and UN entry to your forwarder before the booking. On a first dangerous-goods order, a booking can be rejected or cargo held at the port. Sending the SDS first lets the forwarder catch a wrong entry before booking.

The packaging certificate from China customs

On the China side, customs checks export dangerous-goods packaging twice. First it tests the empty drum or bag and issues a performance test result. Then it checks the filled pack and issues a use-appraisal result, which shows that this pack suits these goods. Exporters call the two together the dangerous-goods packaging certificate.

The goods are inspected by the customs office where they are made. That office issues an electronic record, and the port customs office releases the goods against it.

For your order, the document to ask for is the use-appraisal result for your exact pack. Check two things on the copy you receive. Its package mark must match the mark on your drums. Its write-off column, the box that records how much has already been shipped against it, must still show quantity left. A result still in date may already be used up.

Cal hypo also needs its own booking. It never shares a container with dichlor or trichlor in our shipping. In our experience only a few shipping lines take it, after checking the manufacturer and signing a special carriage agreement.

So book cal hypo early, as its own container. Why the chlorines must stay apart is in our guide to storage and shipping rules for oxidizers.

Packs, labels and your own brand

Next, check the supplier can pack and label an oxidizer in the sizes you sell. Ask for photos of the drum or carton you will get. It should carry your product's UN number. The maximum gross mass in its UN mark should cover the filled pack. Your forwarder confirms the sea rules for each product.

If you sell under your own brand, ask whether the supplier prints your labels too. Our page on Private Label and Custom Packing for Pool & Spa Chemicals shows what we pack. For drums, pails and bags in more detail, read How to Choose Pool Chemical Packaging for Import.

Check 6: payment terms and lead time

Good payment terms keep part of your money with you until the goods ship. Two structures do this. One is a deposit by T/T, a bank transfer, with the balance against a copy of the bill of lading. The bill of lading, or B/L, is the shipping receipt for your goods.

The other is a letter of credit (L/C) at sight. Under it, a bank pays once the shipping documents it receives match the terms of the credit.

Keep the balance until you hold the batch COA and the loading photos. Make it due against the B/L copy plus the matching batch COA, not against a date. Then the money moves only when the documents tie the shipped lot to your batch. Until then, the supplier still has a reason to fix problems. Send payment only to the company you matched in Check 1, so the money goes to the name on the licence you checked.

For a first order, we would choose an L/C at sight if the bank fees are acceptable. It protects you more, because the bank pays only against matching documents, but it costs fees and strict paperwork. A T/T deposit is simpler, and it works when you use the balance terms above.

For comparison, here are our own terms, the same for every product. We take 30% by T/T in advance and 70% against a copy of the B/L, or 100% L/C at sight 11. We usually ship within 3 weeks after the order is confirmed 11.

Compare quotes on the same trade term, or the prices are not comparable. FOB prices the goods up to loading on the ship, CFR adds sea freight, and CIF adds freight and insurance. We quote FOB, CFR or CIF, whichever the buyer asks for.

Lead time needs the same care. Get each supplier's figure in writing: the days from order confirmation to loading. Put that lead time, and what happens if it is missed, into the contract.

Before you send the first deposit

Drop any supplier at the first failed paper check. The three are the plant, the licence and its public record, and the batch documents. Only the suppliers that pass all three are worth a quote, a trial order and a lot check. Then let lot match, packing and payment decide between them.

Start today. Send the same document request to every supplier on your list. Ask the ones that answer fully for a quote. An RFQ, or request for quotation, is that quote request. Our guide on what to put in your RFQ helps you write it. You can Request a Quote from us, or See disinfectant grades and specifications first. More guides like this one are in Sourcing & Partnership.

References

  1. State Council Institutional Reform Plan 2018 (text on cac.gov.cn) — 2018-03-18
  2. State Council Decree 654: Interim Regulations on Enterprise Information Disclosure (text on stats.gov.cn) — 2025-03-06
  3. SAWS Order 55: Measures for Hazardous Chemicals Operating Licences (amended by Order 79, 2015) — 2015-05-27
  4. SAWS Order 41: Measures for Safety Production Licences of Hazardous Chemical Producers (amended by Orders 79 and 89, 2017) — 2017-03-06
  5. State Council of China: Regulations on the Safe Management of Hazardous Chemicals (Decree 591, 2011 revision) — 2011-03-11
  6. State Council: Regulations on the Registration Administration of Market Entities (text on gov.cn) — 2021-08-24
  7. eCFR 49 CFR Part 172 Subpart B: Hazardous Materials Table and Special Provisions — 2026-10-13
  8. eCFR 29 CFR 1910.1200: Hazard Communication — 2026-10-14
  9. IAF CertSearch FAQ (Chinese)
  10. Kingnod: Calcium hypochlorite product page
  11. Kingnod: Trichloroisocyanuric acid (TCCA) product page

Find the Right Pool & Spa Products
for Your Market

Get product recommendations, flexible packaging,
and export support tailored to your business.

Welcome to Contact

Your details stay private. Privacy Policy

Request a Sample

Your details stay private. Privacy Policy