Pool Flocculant vs Clarifier: Which One Should Your Stores Sell?
A flocculant makes the dirt in cloudy water sink, so someone vacuums it out. A clarifier makes the dirt clump just enough for the filter to catch it.
For a distributor, that difference decides what a store can sell, and the customer's filter decides it first. We supply aluminium sulfate floc and clarifier gel cubes to distributors and brands.
- Floc sinks the dirt for the vacuum and often works overnight.
- Clarifier feeds the filter, and some work slowly.
- Floc needs a filter that can vacuum to waste, so it does not suit cartridge filters.
- Fix chlorine, pH and algae first, because neither product replaces them.
- Stock both: floc for heavy cloudiness in pools that can vacuum to waste, clarifier for routine upkeep.
Floc sinks the dirt, clarifier sends it to the filter
Floc drops the dirt to the floor for the vacuum; clarifier sends it into the filter.
Cloudy water is full of particles too small to see one by one. Both products make those particles stick together. The difference is where the clumps go.
A flocculant, or floc, makes big, heavy clumps that sink to the floor. Floc bridges particles so they drop for the vacuum. Someone then vacuums the floor to waste. Vacuum to waste means the dirty water leaves through a drain line instead of going back through the filter.
A clarifier makes smaller clumps that stay in the water. A polymer clarifier binds tiny particles into chains the filter can catch. A polymer is a long, chain-shaped molecule. Nobody has to vacuum.
The Model Aquatic Health Code comes from the US Centers for Disease Control and Prevention (CDC). It is a model rule book that health departments can adopt. Its 2024 notes describe clarifier-type products working through the filter, not by settling to the floor 6.
Our own product pages draw the same line. Our aluminium sulfate page describes impurities that clump, then settle or filter out more easily 3. Our gel cube page describes a clarifier that helps the filter trap finer particles 4.
That gives each product its job. Floc suits pools that can vacuum to waste and need heavy cloudiness cleared fast. Clarifier suits routine upkeep, with the filter doing the work. It works best when the haze is caught early.
| Flocculant | Clarifier | |
|---|---|---|
| Where the dirt goes | Pool floor | Filter |
| Who removes it | Vacuum to waste | The filter |
| How fast | Often overnight | Slower; varies by product |
| Work needed | High | Low |
| Vacuum to waste | Yes, then refill | Not needed |
- Work needed. Floc needs hands-on work from the owner or a service tech after it settles. Clarifier is mostly dose and wait.
- Vacuum to waste. Floc's settled dirt is vacuumed to waste, which sends water out, so the pool needs a top-up. Clarifier needs no special vacuum-to-waste step to remove settled dirt.
For green water and chlorine, see the section on fixing the water first. To see both product types side by side, browse Clarifiers & Flocculants.
How long each one takes
Floc is the faster fix. It often settles overnight, and results show within a few hours. The pool is not clear until the floor has been vacuumed, though. A flocked pool stays still and closed until then, and the label sets when swimmers go back in.
Clarifier is slower. Some polymer clarifiers take much longer to clear the water. Timing varies by product, so the label is the guide.
A gel cube works on a different clock. It sits in the skimmer, the box at the pool's edge where water enters the filter line. Our gel cube page says one cube keeps working for up to two weeks 4. That is how long the cube lasts, not how long the water takes to clear.
Match the product to the customer's filter
The filter decides which product a store can sell. So the first question is which filter the pool has, and the second is whether someone can vacuum to waste.
- Sand filter with a waste setting. Floc works, because the settled dirt can be vacuumed straight out to waste. A clarifier whose label allows sand filters works too.
- Cartridge filter. Floc is the wrong product here, and our gel cubes, made for sand filters, do not fit either. Choose the clarifier by the filter maker's directions.
- DE filter. Floc works only if the owner can vacuum to waste. Our gel cubes do not fit, so pick the clarifier the same way.
A cartridge filter is a pleated fabric cylinder that traps dirt and is hosed clean by hand. DE stands for diatomaceous earth, a fine powder that coats the filter grids. Backwashing means running water backwards through a filter to flush the dirt out.
Why does the filter matter so much? Each type catches a different size of dirt.
- Sand catches about 20 to 40 microns, a typical figure for commercial pools 2. Sand is backwashed.
- DE catches about 4 to 6 microns and is backwashed too 9.
- A cartridge catches about 10 to 25 microns and has no backwash 9.
A micron is a thousandth of a millimetre. Our guide to backwashing and filter media covers sand and glass in detail.
Sand misses more fine particles than cartridge or DE filters do. That is why a sand pool gains the most from a clarifier.
For floc, what decides it is the waste setting. Floc's settled dirt has to leave through it, and sand and some DE set-ups have one. Pushing that much dirt through the filter can overload it and even damage cartridges. A cartridge filter has no backwash or waste setting, so the dirt has nowhere to go but the cartridge.
The gel cube limit comes from our product page, which lists the cubes as not suitable for cartridge or DE filters 4. For swim spas, it lists only those with sand filtration 4.
| Filter | Floc | Liquid clarifier | Our gel cubes |
|---|---|---|---|
| Sand | Yes, with vacuum to waste | If the label allows | Yes |
| Cartridge | No | If the label allows | No |
| DE | Only with vacuum to waste | If the label allows | No |
- Sand. Floc and our gel cubes both fit, so sand-filter stores can stock both.
- Cartridge. Floc stays out of the bag and the clarifier follows the filter's directions, so no clogged cartridge comes back to the store.
- DE. The waste-setting question decides the bag: floc goes in only when the owner confirms one; otherwise the clarifier follows the filter's directions.
Put the filter limit on the shelf tag. It guards against the wrong sale at the counter. When you set up clarifier and floc on the shelf, print on each tag which filters the label allows. Counter staff then ask about the filter first, which keeps floc out of cartridge pools and saves you the return.
Fix chlorine, pH and algae before either one
Neither product kills algae or replaces chlorine, so the water gets fixed first.
Start with the basics. Clarifier comes after water balance and equipment have been checked. In plain words, test chlorine and pH, and make sure the filter runs.
Green water needs the algae killed before anything else. Our guide covers treating algae before clearing the water. Shocking means adding a large dose of chlorine; our guide to cal hypo, short for calcium hypochlorite, covers when to shock before flocculant. Floc is often used after an algaecide treatment, to clear the dead algae.
Floc also moves pH. Some flocs need the water balance adjusted to work well. Alum, short for aluminium sulfate, is acidic. Our safety data sheet for it lists a pH of about 3 for a 1% solution 5. Test pH again after a floc treatment, because the alum pulls it down.
Pass the label's dose and timing on to stores, and have them tell customers to follow it.
Sell a test kit with the clarifier. When a customer buys clarifier for hazy water, check chlorine and pH at the counter. Or add a test kit to the basket. A complaint that the clarifier did not work can come from water that was never balanced. The test catches that before the clarifier gets the blame.
Which customer gets which product
Five questions about cloudy water come up at the counter. Each answer below is short enough for counter staff to repeat, with the reason behind it.
-
Customer: The pool is very cloudy, and it needs to be clear fast. You: Floc, if your filter can vacuum to waste and someone can do the vacuuming. Why: floc suits heavy dirt, such as after a big storm. It also suits pools with poor circulation.
-
Customer: It is just a bit hazy. You: A clarifier whose label allows your filter, with the filter running. Why: clarifier needs no vacuuming to waste, and it suits pools that cannot be vacuumed well.
-
Customer: The pool has a cartridge filter. You: Not floc; pick a clarifier the cartridge maker's directions allow. Why: floc needs a set-up that can vacuum to waste, as the filter section explains.
-
Customer: There is a water ban in town. You: A clarifier this time. Why: floc means vacuuming to waste and then refilling. So it may not be the right choice where water use is restricted.
-
Customer: Can more be added to speed it up? You: Stay at the label dose; more makes it worse, not faster. Why: too much polymer clarifier can make cloudy water worse. The model code adds that too much or too little coagulant, the chemical that makes dirt clump, hurts results 6. Floc follows its own label.
A customer whose pool fits none of these five gets the answer from the product label and the equipment maker's directions.
Floc, clarifier or both: what to stock and check
Carry both, matched to each customer's pool
We recommend carrying both, because they serve different pools, as the first section explains. Our aluminium sulfate floc works best for sand-filter pools that can vacuum to waste, so stock more of it where your stores serve many of them. Customers with cartridge or DE filters choose their clarifier by the filter maker's directions.
Our gel cubes are best for stores with many sand-filter customers. A gel cube is a solid block of clarifier that dissolves slowly in the skimmer at the pool's edge. One cube keeps working for up to two weeks 4. It suits owners who want weekly upkeep without measuring.
The cubes suit sand filters only 4. So stock them for your sand-filter customers. Our salt-pool range guide shows where clarifier and floc sit on the shelf.
What to compare on the spec sheet
For alum, compare the same lines on every quote. Here is how our Aluminium Sulfate Flocculant reads on each of them.
- Aluminium oxide (Al2O3) at 16.0% minimum, the strength figure to compare 3.
- Iron at 0.003% maximum 3.
- Insoluble matter, the part that will not dissolve, at 0.006% maximum 3.
- Lumps, granules or tablets 3, with tablets from 20 g to 200 g 3.
- Bulk packs in 25 kg and 1,000 kg bags as standard, with other packing made to order 3.
A lower price with a lower Al2O3 figure buys less active product, so check that line first.
We also supply PAC, polyaluminium chloride, as an industrial-grade yellow powder. Its COA, or certificate of analysis, gives Al2O3 at 28% minimum. It comes in 25 kg woven bags as standard, with other packing made to order, at 25 MT, or metric tonnes, per full container. It is an industrial grade, not a drinking-water grade, so compare it with other industrial PAC rather than with the alum figures above.
For clarifier, check which filters the label allows and what type of product it is. Our Pool Clarifier Gel Cubes come in 90 g, 100 g and 130 g, four cubes to a box as standard, with other packing made to order. Our gel cube page gives the skimmer placement covered above 4. Custom packaging and labeling are offered for private-label orders 4.
For phosphate control we also supply a lanthanum chloride phosphate remover in a standard 1 L pack, with other packs on request, labelled Lanthanum Chloride 20% Solution and 200 g/L active ingredient.
Our safety data sheet lists oxidizing agents as incompatible with alum, so keep it on a different shelf from chlorine products 5. Our safety data sheet also lists alum as not regulated by the US Department of Transportation for shipping 5.
Public pools need a certified, listed product
NSF/ANSI 50 is the US health and safety standard for pool and spa chemicals and equipment. NSF is the standards body that wrote it. NSF/ANSI 60 is the matching standard for drinking-water treatment chemicals.
Public pools, hotels and gyms follow stricter rules. Where a health department adopts the model code, clarifiers and flocculants at these sites need NSF/ANSI 50 or 60 certification 7. They must also be used as the maker directs 7.
The certificate comes from a certification body accredited by ANSI, the American National Standards Institute 7. Each certified product appears in that body's public online directory, which you can search by product or company name. So ask the supplier which listing covers the product, and look it up there before you quote.
Minimum order, samples and quality checks
Our minimum order is one pallet for alum and one pallet for gel cubes. Private-label orders have the same minimum as standard orders.
The COA and the SDS come with your quote. A COA, or certificate of analysis, shows the test results for a batch. The SDS, or safety data sheet, covers handling and storage. We inspect the goods before shipping and send you the report with photos or videos 4. You can also send your own third-party inspector to the loading.
Unopened, alum and gel cubes have a shelf life of 2 years.
For alum and gel cubes alike, before the balance is paid, we keep a retained sample of your bulk batch ourselves rather than mailing it.
Keep alum bags dry and off the floor. Store the bags closed, on pallets, in a dry bay. Damp alum cakes, and wet bags can corrode metal shelving.
Coagulant, flocculant, polymer: the words on the label
Alum is both a coagulant and a flocculant. That answers the label question, and the words behind it are simpler than they look.
Coagulation means making tiny particles stick together. In water treatment, a chemical is added that binds dirt and small particles 1. The usual choices are aluminum or iron salts 1.
Flocculation is the next step. Gentle mixing grows the small clumps into larger, heavier ones, called flocs 1. A floc weighs more than the water around it, so it sinks 1.
Alum is the short name for aluminium sulfate. It starts the sticking, and then the clumps grow and sink. That is why one page calls it a coagulant and another a flocculant. Our aluminium sulfate page uses both words for the same process 3. Pool flocs are typically aluminum-based, such as alum or poly-aluminum chloride.
Polymer means a long, chain-shaped molecule. Most pool clarifiers are polymer coagulants, either synthetic or natural. These clarifiers carry a positive charge. Most particles that cloud water carry a negative charge, so the two attract and gather into chains.
Chitosan is a natural polymer, and NSF listings include chitosan clarifiers 8. The model code notes these products may contain natural or synthetic polymers, chemicals or metal salts 6. So a label can say clarifier and still hold an aluminum salt.
Our gel cubes are a cationic, meaning positively charged, flocculant-type clarifier.
Compare product type on the safety data sheet, not the brand name. When you compare clarifier and floc offers, read the product identity on each supplier's safety data sheet. Look for a type such as aluminium sulfate or a cationic flocculant-type clarifier. Then check which filters each label allows. Two offers with different names and the same type are then compared on concentration, label dose, the water volume each pack treats and which filters it suits, and only then on price.
Floc for cloudy sand-filter pools, clarifier for upkeep: stock both
Floc sinks the dirt so someone vacuums it to waste; clarifier lets the filter catch it. Sell floc to very cloudy pools that can vacuum to waste, which means sand filters and some DE set-ups. Sell gel cubes only to sand-filter pools. For cartridge and other DE filters, pick the clarifier by the filter maker's directions. Keep both on the shelf, with the filter limits on the tag.
See product specifications for our clarifiers and flocculants, or browse more Product Guides & Comparisons.
References
- CDC: How Water Treatment Works — Originally published: 2023-11-28; Version read: 2023-11-28
- EPA WaterSense at Work 5.3: Commercial Pool and Spa Equipment (2023) — 2023-11
- Kingnod: Aluminium sulfate (Flocculant) product page
- Kingnod: Pool Clarifier Gel Cubes product page
- Kingnod: Aluminium Sulphate (Flocculant water treatment) MSDS — Originally published: 2007-10-09; Version read: 2014-11-06
- CDC Model Aquatic Health Code, 5th Edition (2024), Annex — 2024-12
- CDC Model Aquatic Health Code, 5th Edition (2024), Code Language — 2024-12
- NSF International: NSF/ANSI 50 listings, pool chemicals (clarifiers and filtration aids) — 2026-09-18
- Oregon Health Authority: Pool Operator Training Manual (hosted by Linn County) — 2011-03


